Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Welding or joining cast drums for heater
any hints on making heater from brake drums, in particular joining
together? |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
Welding or joining cast drums for heater
On Mon, 25 Aug 2014 22:23:48 +1000, F Murtz
wrote: any hints on making heater from brake drums, in particular joining together? Preheat and braze? Or preheat and tig with stainless steel wire? |
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
Welding or joining cast drums for heater
On Mon, 25 Aug 2014 22:23:48 +1000, F Murtz
wrote: any hints on making heater from brake drums, in particular joining together? Clean the areas you are wanting to weld with a wire brush/wheel..weld with 6013/7018 or MIG/TIG They are cast steel for the most part. Its a subject that comes up regularly on the welding groups. Google can be your friend. -- "Living in the United States now is like being a Tampon. We're in a great place, just at a bad time." |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Joining plastic to cast-iron gutters | UK diy | |||
Welding cast iron | UK diy | |||
Joining plastic sink waste to cast iron? | UK diy | |||
Joining cast iron and plastic soil pipes? | UK diy | |||
Wrought Iron, Cast Alum and Cast Iron Decorative welding | Metalworking |