Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Trommel working
I got the trommel working today, using an intermediary gear reduction
unit. I am going to exchange one of the pulleys tomorrow so as to get a few more rpm, but it's working nicely, even if it is held together temporarily with vise grips and bubblegum. Tomorrow, I'll start welding it out, and take some pictures of the whole thing. I am satisfied with the trommel, but not its performance. It takes too long to take the husks off, maybe changing the pulley tomorrow will improve it. Pecan handling and processing is turning into a lot of work. Steve |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
need ideas for feeding a trommel sifter | Metalworking | |||
kitchen faucet not working but sprayer is working | Home Repair | |||
strange issue: some plugs are working/ then not working | Home Repair | |||
Sony 35" TV "tuner" bad? - coax not working, but RCA jacks are working | Electronics Repair | |||
Heating Clock not working - but working next door! | UK diy |