Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Hardinge hlv-h power feed motor brushes
I have a Bodine power feed motor that needs brushes. Both Bodine and
Hardinge told me that they are not available through them. Does anyone have a source? George -- |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
Hardinge hlv-h power feed motor brushes
On Tue, 17 Dec 2013 17:18:02 +0000, George
wrote: I have a Bodine power feed motor that needs brushes. Both Bodine and Hardinge told me that they are not available through them. Does anyone have a source? George Pull a brush and go to any electric motor shop and ask them to match them up for you. Gunner -- "Owning a sailboat is like marrying a nymphomaniac. You don’t want to do that but it is great if your best friend does. That way you get all the benefits without any of the upkeep" --- This email is free from viruses and malware because avast! Antivirus protection is active. http://www.avast.com |
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
Hardinge hlv-h power feed motor brushes
George wrote:
I have a Bodine power feed motor that needs brushes. Both Bodine and Hardinge told me that they are not available through them. Does anyone have a source? Some Ace hardware stores have brushes. They have these metal boxes full of springs, strange nuts and couplings, and all sorts of stuff, and one of the boxes has motor brushes. Get the closest one you can find that is a bit bigger, and sand it to an exact fit. You can re-use the spring and terminal cap off the old brush. Jon |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
DVD power feed to disc motor????? | Electronics | |||
OT? where to buy motor brushes (for a convertible top motor) | Home Repair | |||
Power feed on a Hardinge UM | Metalworking | |||
Motor Brushes | Home Repair | |||
Hardinge motor mystery (to me) | Metalworking |