I have lots

On 4/16/2013 7:18 PM, Ignoramus9908 wrote:
I have lots

How much? Shipping will be the kicker, though...

--

On Tue, 16 Apr 2013 19:18:28 -0500, Ignoramus9908
wrote:


I have lots

I wonder how well that would be to make tomahawks out of?

Something like this:

http://www.ebay.com/itm/360627110618

What do you want for a bar of it with shipping, to 93268?

Gunner

On 2013-04-17, Gunner Asch wrote:
On Tue, 16 Apr 2013 19:18:28 -0500, Ignoramus9908
wrote:


I have lots

I wonder how well that would be to make tomahawks out of?

Something like this:

http://www.ebay.com/itm/360627110618

Looks good!

What do you want for a bar of it with shipping, to 93268?

The 53 inch 1.25" thick bar would be $20, plus shipping of whatever it
costs, I can ship on your UPS account too.

i

On 2013-04-17, dpb wrote:
On 4/16/2013 7:18 PM, Ignoramus9908 wrote:
I have lots

How much? Shipping will be the kicker, though...

15-20 tons. Freight shipping to business address should be cheap per
lb.

i

On Tue, 16 Apr 2013 20:12:01 -0500, Ignoramus9908
wrote:

On 2013-04-17, Gunner Asch wrote:
On Tue, 16 Apr 2013 19:18:28 -0500, Ignoramus9908
wrote:


I have lots

I wonder how well that would be to make tomahawks out of?

Something like this:

http://www.ebay.com/itm/360627110618

Looks good!

What do you want for a bar of it with shipping, to 93268?

The 53 inch 1.25" thick bar would be $20, plus shipping of whatever it
costs, I can ship on your UPS account too.

i

I dont have a clue as to what the bar weighs. Got any idea of what it
would cost to ship to California?

Gunner

On 2013-04-17, Gunner Asch wrote:
On Tue, 16 Apr 2013 20:12:01 -0500, Ignoramus9908
wrote:

On 2013-04-17, Gunner Asch wrote:
On Tue, 16 Apr 2013 19:18:28 -0500, Ignoramus9908
wrote:


I have lots

I wonder how well that would be to make tomahawks out of?

Something like this:

http://www.ebay.com/itm/360627110618

Looks good!

What do you want for a bar of it with shipping, to 93268?

The 53 inch 1.25" thick bar would be $20, plus shipping of whatever it
costs, I can ship on your UPS account too.

i

I dont have a clue as to what the bar weighs. Got any idea of what it
would cost to ship to California?

Gunner


I would say $25 by UPS. If you want to buy pieces under 12 inches, I
canmail them by USPS, $12.34 per box under 70 lbs.

On 4/17/2013 3:01 AM, Gunner Asch wrote:
....

I dont have a clue as to what the bar weighs. ...

SS ~ 0.3 lb/in^3 so say it's 1/3...

3[.14](5/8)^2*53/3 -- 25/64*53 ~ 25/65*53 -- 5/13*53 ~ 5/13*52 -- ~20 lb

--

On 2013-04-17, dpb wrote:
On 4/17/2013 3:01 AM, Gunner Asch wrote:
I dont have a clue as to what the bar weighs. ...
SS ~ 0.3 lb/in^3 so say it's 1/3...
3[.14](5/8)^2*53/3 -- 25/64*53 ~ 25/65*53 -- 5/13*53 ~ 5/13*52 -- ~20 lb

Since I do this a lot, I made a nice calculator for myself for plate
and rounds. I use it a lot from my cell phone browser.

http://www.algebra-inc.com/scrap.mpl -- Scrap calculator.

Feel free to use it.

i

On Wed, 17 Apr 2013 16:21:16 -0500, Ignoramus24865
wrote:


On 2013-04-17, dpb wrote:
On 4/17/2013 3:01 AM, Gunner Asch wrote:
I dont have a clue as to what the bar weighs. ...
SS ~ 0.3 lb/in^3 so say it's 1/3...
3[.14](5/8)^2*53/3 -- 25/64*53 ~ 25/65*53 -- 5/13*53 ~ 5/13*52 -- ~20 lb

Since I do this a lot, I made a nice calculator for myself for plate
and rounds. I use it a lot from my cell phone browser.

http://www.algebra-inc.com/scrap.mpl -- Scrap calculator.

Feel free to use it.

i

Many thanks!!

Gunner

On Wed, 17 Apr 2013 16:21:16 -0500, Ignoramus24865 wrote:

On 2013-04-17, dpb wrote:
On 4/17/2013 3:01 AM, Gunner Asch wrote:
I dont have a clue as to what the bar weighs. ...
SS ~ 0.3 lb/in^3 so say it's 1/3...
3[.14](5/8)^2*53/3 -- 25/64*53 ~ 25/65*53 -- 5/13*53 ~ 5/13*52 -- ~20 lb

Since I do this a lot, I made a nice calculator for myself for plate
and rounds. I use it a lot from my cell phone browser.

http://www.algebra-inc.com/scrap.mpl -- Scrap calculator.

Feel free to use it.

In the query I tried, your program used the word "tons" (non-metric)
where it should be "tonnes" (metric). For example, it displays

113.70 tons
250138.24 lbs

(113.46 would be a more accurate answer; there are
about 2204.62 pounds per tonne, not 2200.)

--
jiw

On 2013-04-17, James Waldby wrote:
On Wed, 17 Apr 2013 16:21:16 -0500, Ignoramus24865 wrote:

On 2013-04-17, dpb wrote:
On 4/17/2013 3:01 AM, Gunner Asch wrote:
I dont have a clue as to what the bar weighs. ...
SS ~ 0.3 lb/in^3 so say it's 1/3...
3[.14](5/8)^2*53/3 -- 25/64*53 ~ 25/65*53 -- 5/13*53 ~ 5/13*52 -- ~20 lb

Since I do this a lot, I made a nice calculator for myself for plate
and rounds. I use it a lot from my cell phone browser.

http://www.algebra-inc.com/scrap.mpl -- Scrap calculator.

Feel free to use it.

In the query I tried, your program used the word "tons" (non-metric)
where it should be "tonnes" (metric). For example, it displays

113.70 tons
250138.24 lbs

(113.46 would be a more accurate answer; there are
about 2204.62 pounds per tonne, not 2200.)


Do not get me started on this bull****, I hate it myself.

i

Nice for normal steel.
I use a lot of AR400 and it is much denser.
I thought it was heavy but when I got some AR500F
in 3/8" thick it cuts like 1/2" AR400 and weighs about
that much more. It is restricted so Quality sheets showing alloy
percentages were not allowed. A .223 rifle bullet at 25 yards
just dimples a tiny spot and powders and sheds the bullet.

The targets were made for the men in black and white.
Two different teams.

Martin

On 4/17/2013 5:24 PM, Gunner Asch wrote:
On Wed, 17 Apr 2013 16:21:16 -0500, Ignoramus24865
wrote:


On 2013-04-17, dpb wrote:
On 4/17/2013 3:01 AM, Gunner Asch wrote:
I dont have a clue as to what the bar weighs. ...
SS ~ 0.3 lb/in^3 so say it's 1/3...
3[.14](5/8)^2*53/3 -- 25/64*53 ~ 25/65*53 -- 5/13*53 ~ 5/13*52 -- ~20 lb

Since I do this a lot, I made a nice calculator for myself for plate
and rounds. I use it a lot from my cell phone browser.

http://www.algebra-inc.com/scrap.mpl -- Scrap calculator.

Feel free to use it.

i

Many thanks!!

Gunner

"Gunner Asch" wrote in message
...

On Tue, 16 Apr 2013 19:18:28 -0500, Ignoramus9908
wrote:


I have lots

I wonder how well that would be to make tomahawks out of?

Something like this:

http://www.ebay.com/itm/360627110618

What do you want for a bar of it with shipping, to 93268?

Gunner

I turned an automotive axle in my lathe once, it dulled a lot of carbide.
It would be cutting OK, all of a sudden a spark and there goes the tool bit.
It seemed to have hard parts in the steel, might make a poor man's Damascus
(hard and softer steel combined).

RogerN

On 4/16/2013 10:13 PM, Ignoramus9908 wrote:
On 2013-04-17, wrote:
On 4/16/2013 7:18 PM, Ignoramus9908 wrote:
I have lots

How much? Shipping will be the kicker, though...

15-20 tons. Freight shipping to business address should be cheap per
lb.

Wouldn't have use for a truckload--just tried pricing a full-load
shipment for another piece of gear of about the same weight/size as 20
or so of these would be and was exorbitantly expensive...

--

On 2013-04-18, dpb wrote:
On 4/16/2013 10:13 PM, Ignoramus9908 wrote:
On 2013-04-17, wrote:
On 4/16/2013 7:18 PM, Ignoramus9908 wrote:
I have lots

How much? Shipping will be the kicker, though...

15-20 tons. Freight shipping to business address should be cheap per
lb.

Wouldn't have use for a truckload--just tried pricing a full-load
shipment for another piece of gear of about the same weight/size as 20
or so of these would be and was exorbitantly expensive...

--


I can send you one bar for $20, plus shipping.

I can cut them and fit in a flat rate box for 12.34.

i

On 4/18/2013 10:06 AM, Ignoramus8993 wrote:
....

I can send you one bar for $20, plus shipping.

I can cut them and fit in a flat rate box for 12.34.

I'd want the full length for the idea where I'd use them. Was
essentially a wish-for--

I'll just use some angle instead but the round stainless bar would be
kewl for appearance's sake...but is not a requirement that the part be
either SS or round.

--