 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
bending mild steel 180
I need to "invert" a stamped steel part; at one end there is a spring
hook made with a 90 degree bend at its base. I need to flip this hook 180 so it is 90 degrees on the other side. The stamping is about 3/32" thick and the hook projects maybe 1/4". I only have one chance at this. I assume it is mild steel. Cold? Hot? If hot how hot? |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Schedule 40,80, mild steel | Metalworking | |||
| Mild steel and stregth | Metalworking | |||
| Welding SS to mild steel | UK diy | |||
| rebar - why is mild steel okay? | UK diy | |||
| mild steel question | Metalworking | |||
![xpzzzz[_3_] is offline](https://www.diybanter.com/images/SultanThemeVB3R/statusicon/user_offline.gif)
Threaded Mode
