Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Screwcutting Gear Ratio Calculator Threading Screw Cutting Lathe Gear Selector
This calculator offers numerous options to suit several different lathes. http://www.imagesalad.com/lathenovic...athegears.html http://lathenovice.wordpress.com/ -- WB .......... |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
Screwcutting Gear Ratio Calculator Threading Screw CuttingLathe Gear Selector
On Tue, 03 Apr 2012 14:29:35 -0400, Wild_Bill wrote:
This calculator offers numerous options to suit several different lathes. http://www.imagesalad.com/lathenovic...athegears.html http://lathenovice.wordpress.com/ Interesting, but wouldn't work with my Smithy, which has a gearbox between the change gears and the lead screw (said gearbox having a fast/ slow lever that changes the ratio by 2:1). I've just got a chart of all possible combinations, with most of the repeats winnowed out. -- My liberal friends think I'm a conservative kook. My conservative friends think I'm a liberal kook. Why am I not happy that they have found common ground? Tim Wescott, Communications, Control, Circuits & Software http://www.wescottdesign.com |
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
Screwcutting Gear Ratio Calculator Threading Screw Cutting Lathe Gear Selector
"Tim Wescott" wrote in message news On Tue, 03 Apr 2012 14:29:35 -0400, Wild_Bill wrote: This calculator offers numerous options to suit several different lathes. Interesting, but wouldn't work with my Smithy, which has a gearbox between the change gears and the lead screw (said gearbox having a fast/ slow lever that changes the ratio by 2:1). The gearing isn't that difficult to figure out. If the spindle and leadscrew turn at the same speed, the lathe will copy the leadscrew's pitch. For other pitches the cut-thread-to-leadscrew ratio equals the gear ratio. jsw |
#4
Posted to rec.crafts.metalworking
|
|||
|
|||
Screwcutting Gear Ratio Calculator Threading Screw Cutting Lathe Gear Selector
I have a Smithy 1220XL, but it's been in a crate for the past couple of
years. If one of the headstock case Hi/Low selector positions is 1:1, a gear calculator should werk.. I can't say for sure. Maybe you could send a copy of the chart to the metalworking dropbox: http://www.metalworking.com/dropbox/ http://www.metalworking.com/dropbox.html -- WB .......... "Tim Wescott" wrote in message news On Tue, 03 Apr 2012 14:29:35 -0400, Wild_Bill wrote: This calculator offers numerous options to suit several different lathes. http://www.imagesalad.com/lathenovic...athegears.html http://lathenovice.wordpress.com/ Interesting, but wouldn't work with my Smithy, which has a gearbox between the change gears and the lead screw (said gearbox having a fast/ slow lever that changes the ratio by 2:1). I've just got a chart of all possible combinations, with most of the repeats winnowed out. |
#5
Posted to rec.crafts.metalworking
|
|||
|
|||
Screwcutting Gear Ratio Calculator Threading Screw Cutting Lathe Gear Selector
"Wild_Bill" wrote in message ... I have a Smithy 1220XL, but it's been in a crate for the past couple of years. If one of the headstock case Hi/Low selector positions is 1:1, a gear calculator should werk.. I can't say for sure. If not you figure out an equivalent leadscrew pitch that is 1:1 to the spindle with equal-sized gears in the train. Say the leadscrew pitch is 4 TPI and installing equal-sized change gears on the banjo makes it turn half as fast as the spindle. You would calculate threading gear ratios as though it were 8TPI. On my lathe the quick-change gearbox input shaft turns at 3/7 of the spindle speed. jsw |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Bridgeport Series II Interact 2 back gear ratio | Metalworking | |||
Gear Ratio Approximations | Metalworking | |||
exact gear ratio | Metalworking | |||
Gear Cutting for the lathe. | Metalworking | |||
how do you remove the lead screw gear on a craftsman 109.20630 lathe? | Metalworking |