Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Lincoln SA-200 Starter: repair or replace?
On Wed, 30 Mar 2011 21:34:49 -0500, Ignoramus23509
wrote: Pete, look at this picture. http://igor.chudov.com/projects/Linc...arter-0006.jpg The commutator looks like ****. Understatement. Can you say "That starter is HISTORY!"? I knew you could. Put it back together and pray for a core allowance. They might not if you left the endcap off. -- The general effect was exactly like a microscopic view of a small detachment of black beetles, in search of a dead rat. -- John Ruskin |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Lincoln SA-200 Starter: repair or replace? | Metalworking | |||
Repair or replace | Home Repair | |||
car repair - starter motor won't engage | UK diy | |||
Cost of gas starter fuel vs. starter logs | Home Repair | |||
Battery charger/starter repair | Electronics Repair |