Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Bought a new Honda Lawn Mower
I bought a new Honda lawn mower from Home Despot this week. It cost me
650 bucks. All I can say is this thing better work great and it better last me at least 10 years for that price. I bought a 225 dollar Craftsman a couple of years ago and it won't even start now. I hope it's true that you get what you pay for. I paid for a good one. Anybody else spend their money on a Honda mower? And was it worth it? Hawke |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
Bought a new Honda Lawn Mower
Hawke wrote:
I bought a new Honda lawn mower from Home Despot this week. It cost me 650 bucks. All I can say is this thing better work great and it better last me at least 10 years for that price. I bought a 225 dollar Craftsman a couple of years ago and it won't even start now. I hope it's true that you get what you pay for. I paid for a good one. Anybody else spend their money on a Honda mower? And was it worth it? Hawke Enjoy the Honda! Briggs & Stratton... We bought a B&S engined MTD chipper at Home Depot, and the POS suffered valve failure after approximately 20 hours use. Forget which valve, probably exhaust, the entire stem was galled and the tip ripped away from the keeper. I removed the cylinder head and lifted the valve out, it was no longer attached to anything. If it were an overhead valve design, it would have fallen into the cylinder and beaten the piston to smithereens too. What a pile of crap. |
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
Bought a new Honda Lawn Mower
On 1/31/2011 3:09 PM, Hawke wrote:
I bought a new Honda lawn mower from Home Despot this week. It cost me 650 bucks. All I can say is this thing better work great and it better last me at least 10 years for that price. I bought a 225 dollar Craftsman a couple of years ago and it won't even start now. I hope it's true that you get what you pay for. I paid for a good one. Anybody else spend their money on a Honda mower? And was it worth it? Hawke The Honda will last ,I bought a Honda Buffalo ( sold here in Australia ) ,damn thing starts every time first pull . No ripping the arm out of its socket trying to start , plenty of grunt for thick grass and a nice wide cut.I dont think you regret the money . As a point of interest I paid $800.00 AUD two years ago.So far no trouble . I must say that the Briggs powered mower I had before lasted 23 years before I near dislocated my arm socket trying to start it . I did change oil and filters regularly and washed it dowwn every time after use . The Honda should last as long if not longer with the same care. -- Kevin (Bluey) "I'm not young enough to know everything." |
#4
Posted to rec.crafts.metalworking
|
|||
|
|||
Bought a new Honda Lawn Mower
On 1/31/2011 12:39 AM, Hawke wrote:
I bought a new Honda lawn mower from Home Despot this week. It cost me 650 bucks. All I can say is this thing better work great and it better last me at least 10 years for that price. I bought a 225 dollar Craftsman a couple of years ago and it won't even start now. I hope it's true that you get what you pay for. I paid for a good one. Anybody else spend their money on a Honda mower? And was it worth it? Hawke I got a cub cadet a couple years ago with a honda motor on it and I love it. I've always had bad luck with the B&S motors, at least the newer ones. The one my dad had lasted forever from what I remember. |
#5
Posted to rec.crafts.metalworking
|
|||
|
|||
Bought a new Honda Lawn Mower
On Jan 31, 9:39*am, tnik wrote:
On 1/31/2011 12:39 AM, Hawke wrote: I bought a new Honda lawn mower from Home Despot this week. It cost me 650 bucks. All I can say is this thing better work great and it better last me at least 10 years for that price. I bought a 225 dollar Craftsman a couple of years ago and it won't even start now. I hope it's true that you get what you pay for. I paid for a good one. Anybody else spend their money on a Honda mower? And was it worth it? Hawke I got a cub cadet a couple years ago with a honda motor on it and I love it. I've always had bad luck with the B&S motors, at least the newer ones. The one my dad had lasted forever from what I remember. My lawnmower, now 10 years or so old became more and more difficult to start... When I made noises about replacing it, son saw the $$$$ flying and suggested that he try to overhaul/tune-up the thing. Turned out that the carb float had "liquid" in it but we couldn't find a leak. Heated it gently with a lighter (outdoors of course) and numerous cracks on the inside edge of the donut-shaped float started spewing gasoline fumes with flames! Replaced the float and all was well. It now starts with 5 pumps of the primer bulb and a pull or two on the starter rope. Wolfgang |
#6
Posted to rec.crafts.metalworking
|
|||
|
|||
Bought a new Honda Lawn Mower
On Jan 31, 9:30*am, Joe Cool wrote:
On Jan 31, 9:39*am, tnik wrote: On 1/31/2011 12:39 AM, Hawke wrote: I bought a new Honda lawn mower from Home Despot this week. It cost me 650 bucks. All I can say is this thing better work great and it better last me at least 10 years for that price. I bought a 225 dollar Craftsman a couple of years ago and it won't even start now. I hope it's true that you get what you pay for. I paid for a good one. Anybody else spend their money on a Honda mower? And was it worth it? Hawke I got a cub cadet a couple years ago with a honda motor on it and I love it. I've always had bad luck with the B&S motors, at least the newer ones. The one my dad had lasted forever from what I remember. My lawnmower, now 10 years or so old became more and more difficult to start... When I made noises about replacing it, son saw the $$$$ flying and suggested that he try to overhaul/tune-up the thing. Turned out that the carb float had "liquid" in it but we couldn't find a leak. *Heated it gently with a lighter (outdoors of course) and numerous cracks on the inside edge of the donut-shaped float started spewing gasoline fumes with flames! Replaced the float and all was well. *It now starts with 5 pumps of the primer bulb and a pull or two on the starter rope. Wolfgang There WAS a time when carb floats were brass and seldom leaked, if they did, they could be drained, resoldered and fixed. In the inexorable race to the bottom line, I've seen carb floats made of rubber-covered cork(probably NOT rubber, but resembled it), blow- molded plastic and some kind of hard black foam on the first Ford I owned. That last type seemed like it wouldn't last at all, but didn't pick up any weight in all the years I had it. The best of the small single-cylinder engines I've had didn't have a carb as such, was a B&S with a Pulsa-jet. Crankcase pressure pulses pumped gas into an elevated well in the tank, then the venturi sucked it in. Only real wear part was the pumping diaphram and it never went bad. So no needle or float to mess with and only a mixture screw. No shutoff valve needed, either. Always seemed to take off after a couple of pulls no matter how many months it sat. Was discontinued, of course. Stan |
#7
Posted to rec.crafts.metalworking
|
|||
|
|||
Bought a new Honda Lawn Mower
The best of the small single-cylinder engines I've had didn't have a
carb as such, was a B&S with a Pulsa-jet. *Crankcase pressure pulses pumped gas into an elevated well in the tank, then the venturi sucked it in. *Only real wear part was the pumping diaphram and it never went bad. So no needle or float to mess with and only a mixture screw. No shutoff valve needed, either. Always seemed to take off after a couple of pulls no matter how many months it sat. Was discontinued, of course. I've got two of those motors, and three carbs between them. The new gas still manages to gum them up solid. --Glenn Lyford |
#8
Posted to rec.crafts.metalworking
|
|||
|
|||
Bought a new Honda Lawn Mower
Glenn Lyford wrote:
I've got two of those motors, and three carbs between them. The new gas still manages to gum them up solid. What new gas are you talking about? I have been getting ethanol blended gasoline at the local Farm Co-op since the 70's And no it doesn't gum up carburetors Quite the opposite it will clean out gummed up gas tanks -jim |
#9
Posted to rec.crafts.metalworking
|
|||
|
|||
Bought a new Honda Lawn Mower
On Sun, 30 Jan 2011 21:39:37 -0800, Hawke
wrote: I bought a new Honda lawn mower from Home Despot this week. It cost me 650 bucks. All I can say is this thing better work great and it better last me at least 10 years for that price. I bought a 225 dollar Craftsman a couple of years ago and it won't even start now. I hope it's true that you get what you pay for. I paid for a good one. Anybody else spend their money on a Honda mower? And was it worth it? Hawke My son bought a new Toro mower a couple of years ago. Had nothing but problems with it and terrible warranty/service/support experience. He finally got fed up, bought a Honda about a year ago and he has been delighted with it. |
#10
Posted to rec.crafts.metalworking
|
|||
|
|||
Bought a new Honda Lawn Mower
On Jan 30, 10:39*pm, Hawke wrote:
I bought a new Honda lawn mower from Home Despot this week. It cost me 650 bucks. All I can say is this thing better work great and it better last me at least 10 years for that price. I bought a 225 dollar Craftsman a couple of years ago and it won't even start now. I hope it's true that you get what you pay for. I paid for a good one. Anybody else spend their money on a Honda mower? And was it worth it? Hawke Bought our Honda mower in 1986, it will start after a winters sleep in 1/2 a pull, every time. Keep the blades sharp and change the oil to synthetic ( change it every other year), is all the maintenance you will need to do. What a fine machine. |
#11
Posted to rec.crafts.metalworking
|
|||
|
|||
Bought a new Honda Lawn Mower
On 2/2/2011 4:18 AM, accunlmtd wrote:
On Jan 30, 10:39 pm, wrote: I bought a new Honda lawn mower from Home Despot this week. It cost me 650 bucks. All I can say is this thing better work great and it better last me at least 10 years for that price. I bought a 225 dollar Craftsman a couple of years ago and it won't even start now. I hope it's true that you get what you pay for. I paid for a good one. Anybody else spend their money on a Honda mower? And was it worth it? Hawke Bought our Honda mower in 1986, it will start after a winters sleep in 1/2 a pull, every time. Keep the blades sharp and change the oil to synthetic ( change it every other year), is all the maintenance you will need to do. What a fine machine. That's music to my ears. Hawke |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Honda lawn mower valve problem | Home Repair | |||
honda model hrt216sdr lawn mower | Home Repair | |||
Honda Lawn Mower | Home Repair | |||
Craftsman lawn mower scalps lawn- need advice | Home Repair | |||
Honda Easty Start Lawn mower problem | Home Repair |