Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Help with Palmgren rotary table?
I have an 8" Palmgren rotary table. The table is marked with 180
divisions, or 2 degrees per division. The crank has 100 divisions. One turn of the crank turns the table 9 divisions, or 18 degrees, making one division on the crank .18 degrees. Nothing appears to be direct reading. Is the design screwy, or do I not know the proper technique? Kevin Gallimore |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Palmgren rotary table info? | Metalworking | |||
Help identifying Palmgren table? | Metalworking | |||
Help identify a Palmgren rotary table? | Metalworking | |||
Help identify a Palmgren rotary table? | Metalworking | |||
Palmgren Rotary table | Metalworking |