Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #41   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 3,984
Default Todays plasticworking

On Jun 27, 6:56*pm, Wes wrote:
Larry Jaques wrote:
Since we are talking about hare-brained ideas, if my coke is flat, can I put a bit of dry
ice in it and recarbonate it if I screw the lid on? *


Well, if you were to do that and shake it vigorously...


I know, too much and I have a dry ice bomb of sorts. *Still, I wonder if just enough would
do the trick? *Think of the possiblilites, your own carbonated orange juice or lemonaid.

Wes
--
"Additionally as a security officer, I carry a gun to protect
government officials but my life isn't worth protecting at home
in their eyes." *Dick Anthony Heller


Richard Kinch seems to have quit reading RCM. But you might have a
look at his web site for information on carbonating. Lots of good
info.

http://www.truetex.com/carbonation.htm

Dan
  #42   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 3,984
Default Todays plasticworking

On Jun 27, 6:56*pm, Wes wrote:
Larry Jaques wrote:
Since we are talking about hare-brained ideas, if my coke is flat, can I put a bit of dry
ice in it and recarbonate it if I screw the lid on? *


Well, if you were to do that and shake it vigorously...


I know, too much and I have a dry ice bomb of sorts. *Still, I wonder if just enough would
do the trick? *Think of the possiblilites, your own carbonated orange juice or lemonaid.

Wes
--
"Additionally as a security officer, I carry a gun to protect
government officials but my life isn't worth protecting at home
in their eyes." *Dick Anthony Heller


Richard Kinch seems to have quit reading RCM. But you might have a
look at his web site for information on carbonating. Lots of good
info.

http://www.truetex.com/carbonation.htm

Dan
  #43   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 3,984
Default Todays plasticworking

On Jun 27, 6:56*pm, Wes wrote:

I know, too much and I have a dry ice bomb of sorts. *Still, I wonder if just enough would
do the trick? *Think of the possiblilites, your own carbonated orange juice or lemonaid.

Wes


For Dry Ice try the yellow pages. Here places that sell dry ice are
listed in the yellow pages under both Dry and under Ice.

I thought Richard Kinch might speak up here, but he seems to have quit
reading RCM. But have a look at his web site.

http://www.truetex.com/carbonation.htm

Dan
  #44   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 47
Default Todays plasticworking

Since we are talking about hare-brained ideas, if my coke is flat, can I
put a bit of dry
ice in it and recarbonate it if I screw the lid on?


Tried it, doesn't recarbonate it. I dropped a tablespoon or so of powdered
dry ice into a 20 oz glass about 2/3 full of Coke. Got lots of bubbling and
fizzing and a cool fog rolling off the top - it was definitely worth it when
I walked outside to sit for lunch with some fellow students back in grad
school :-). Problem is you need the pressure to drive lots of CO2 into
solution to get the proper amount of carbonation, the dry ice wasn't nearly
enough at atmospheric pressure.

-----
Regards,
Carl Ijames


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Todays metalworking Wes[_5_] Metalworking 1 May 5th 10 03:02 PM
OT; Todays top H&S tip The Medway Handyman[_2_] UK diy 71 March 8th 10 08:02 PM
Todays picture jloomis Woodworking Plans and Photos 9 November 2nd 09 03:03 PM
Todays picture jloomis Woodworking Plans and Photos 3 November 2nd 09 03:03 PM
Todays Pen Project Mike Mac Woodworking 4 October 30th 06 05:58 PM


All times are GMT +1. The time now is 11:04 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"