Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Spindle Bore specification question
When spindle bore is specified as (say) 1", does that mean I can pass
a typical piece of 1" stock through it? The tolerance on standard stock is, say +/-0.002" so the actual hole would have to be a few thou bigger than nominal. Is it that way or is the bore size usually just the nominal size? I'm talking bout Griz import lathes if it makes any difference. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Fitting large-bore mandrel to a smaller bore motor? | Metalworking | |||
linley jig bore question | Metalworking | |||
Homemade CNC 2 spindle lathe question | Metalworking | |||
Spindle bering question | Metalworking | |||
Question about removing spindle on Jet lathe | Metalworking |