Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 657
Default Reading RCM via Mac?

--A pal of mine was wondering what other Mac users prefer for
reading usenet. I'm on the PC side of the fence using putty and haven't a
clue what's on the Mac side.
Suggestions welcome and I'll pass 'em along to my pal

--
"Steamboat Ed" Haas : Blue Cross socks us
Hacking the Trailing Edge! : $23,000/yr!! ...
www.nmpproducts.com
---Decks a-wash in a sea of words---
  #2   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 1,475
Default Reading RCM via Mac?

On 25 Mar 2010 20:05:34 GMT, steamer wrote:

--A pal of mine was wondering what other Mac users prefer for
reading usenet.


Google?
;-)

I'm on the PC side of the fence using putty and haven't a
clue what's on the Mac side.
Suggestions welcome and I'll pass 'em along to my pal



I've heard Unison is okay.

  #3   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 533
Default Reading RCM via Mac?

In article ,
steamer wrote:

--A pal of mine was wondering what other Mac users prefer for
reading usenet. I'm on the PC side of the fence using putty and haven't a
clue what's on the Mac side.
Suggestions welcome and I'll pass 'em along to my pal


MT-NewsWatcher

Works well, mine has been (last few months, not sure what set it off)
occasionally claiming it's closed unexpectedly when I've actually
closed/quit it intentionally, but other than that I've been using it for
many years with no problems (and it seems to saves the read news
correctly even when that happens).

--
Cats, coffee, chocolate...vices to live by
  #4   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 425
Default Reading RCM via Mac?

In article ,
steamer wrote:

--A pal of mine was wondering what other Mac users prefer for
reading usenet. I'm on the PC side of the fence using putty and haven't a
clue what's on the Mac side.
Suggestions welcome and I'll pass 'em along to my pal


I've used MT Newswatcher for eons... even way back in the old system 9
days. It's a class act, I recommend it without reservation.

http://www.smfr.org/mtnw/

Erik
  #5   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 1,148
Default Reading RCM via Mac?

steamer wrote:
--A pal of mine was wondering what other Mac users prefer for
reading usenet. I'm on the PC side of the fence using putty and haven't a
clue what's on the Mac side.
Suggestions welcome and I'll pass 'em along to my pal


Well, I run Linux, but that is the base of OS-X anyway. I use
thunderbird for both email and usenet groups. I find it integrates
mail/news and web stuff pretty well. I've been using some form of
netscape/mozilla/firefox/thunderbird for at least 12 years, I think.

Jon


  #6   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 2,600
Default Reading RCM via Mac?

On 2010-03-25, steamer wrote:
--A pal of mine was wondering what other Mac users prefer for
reading usenet. I'm on the PC side of the fence using putty and haven't a
clue what's on the Mac side.
Suggestions welcome and I'll pass 'em along to my pal


Well ... I haven't done newsreading on my Mac, but if I were to
do so, I would probably download this:

http://slrn.darwinports.com/

so I could continue using slrn as my newsreader.

I don't know whether it supports a GUI interface on the Mac, but
I do know that it works nicely in a plain text screen, which is what I
prefer under a newsreader.

It also lets you configure which editor to use -- and I normally
use jove on my other unix systems, but if I did not have it downloaded
for the Mac (I do have it) I would probably pick emacs as the editor. I
know that one is supplied with the extras with Mac OS-X.

Enjoy,
DoN.

--
Email: | Voice (all times): (703) 938-4564
(too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html
--- Black Holes are where God is dividing by zero ---
  #7   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 17
Default Reading RCM via Mac?

In article ,
"DoN. Nichols" wrote:

On 2010-03-25, steamer wrote:
--A pal of mine was wondering what other Mac users prefer for
reading usenet. I'm on the PC side of the fence using putty and haven't a
clue what's on the Mac side.
Suggestions welcome and I'll pass 'em along to my pal


Well ... I haven't done newsreading on my Mac, but if I were to
do so, I would probably download this:

http://slrn.darwinports.com/

so I could continue using slrn as my newsreader.

I don't know whether it supports a GUI interface on the Mac, but
I do know that it works nicely in a plain text screen, which is what I
prefer under a newsreader.

It also lets you configure which editor to use -- and I normally
use jove on my other unix systems, but if I did not have it downloaded
for the Mac (I do have it) I would probably pick emacs as the editor. I
know that one is supplied with the extras with Mac OS-X.

Enjoy,
DoN.



I highly recommend MT-newswatcher. Very good newsreader, very flexible,
but easy to use. http://ww.smfr.org/mtnw

--Joel

--
remove "xxxnospamxxx" to reach me
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
OT Reading TheOldFellow UK diy 11 September 27th 09 11:35 AM
hello Sam, what are we reading Gordon[_6_] Electronics Repair 0 April 13th 09 02:26 AM
Now I know why I stopped Reading REC Mike Zuchick Woodworking 9 May 24th 05 03:11 PM
Reading this ng Matthew Woodworking 0 January 30th 05 06:55 PM


All times are GMT +1. The time now is 04:32 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"