Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
More engine pictures
http://igor.chudov.com/tmp/Diesel-Engine/
The scrubber itself found its resting place at United Metals of Chicago today. |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
More engine pictures
On Aug 1, 2:12*pm, Ignoramus19365 ignoramus19...@NOSPAM.
19365.invalid wrote: http://igor.chudov.com/tmp/Diesel-Engine/ The scrubber itself found its resting place at United Metals of Chicago today. I googled the two part numbers I could see in the pictures and the one on the starter comes back - starter for 36 hp Diesel. So, looks like that is certainly a Kubota. Sure hope the cooling system was drained as per the warning decal. And, it sure looks like a project. Paul |
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
More engine pictures
On Aug 1, 2:12 pm, Ignoramus19365 ignoramus19...@NOSPAM. 19365.invalid wrote: http://igor.chudov.com/tmp/Diesel-Engine/ Ah, Iggy. To have your youth, ambition and energy. Today we cleaned the garage, that is what we couldn't finish yesterday. Enjoy it young man, for one day it will be gone. Ya done good. Steve |
#4
Posted to rec.crafts.metalworking
|
|||
|
|||
More engine pictures
On Aug 1, 5:49*pm, KD7HB wrote:
On Aug 1, 2:12*pm, Ignoramus19365 ignoramus19...@NOSPAM. 19365.invalid wrote: http://igor.chudov.com/tmp/Diesel-Engine/ The scrubber itself found its resting place at United Metals of Chicago today. I googled the two part numbers I could see in the pictures and the one on the starter comes back - starter for 36 hp Diesel. So, looks like that is certainly a Kubota. Sure hope the cooling system was drained as per the warning decal. And, it sure looks like a project. Paul And if you haven't found the engine serial number, this URL will show where it might be located: http://www.kubotaengine.com/products/snid_en.html Paul |
#5
Posted to rec.crafts.metalworking
|
|||
|
|||
More engine pictures
On 2009-08-02, SteveB wrote:
On Aug 1, 2:12 pm, Ignoramus19365 ignoramus19...@NOSPAM. 19365.invalid wrote: http://igor.chudov.com/tmp/Diesel-Engine/ Ah, Iggy. To have your youth, ambition and energy. Today we cleaned the garage, that is what we couldn't finish yesterday. Enjoy it young man, for one day it will be gone. Ya done good. You know Steve, even now I notice that I have less of all of the above... I was completely exhausted after taking that engine out... i |
#6
Posted to rec.crafts.metalworking
|
|||
|
|||
More engine pictures
On 2009-08-02, KD7HB wrote:
On Aug 1, 5:49?pm, KD7HB wrote: On Aug 1, 2:12?pm, Ignoramus19365 ignoramus19...@NOSPAM. 19365.invalid wrote: http://igor.chudov.com/tmp/Diesel-Engine/ The scrubber itself found its resting place at United Metals of Chicago today. I googled the two part numbers I could see in the pictures and the one on the starter comes back - starter for 36 hp Diesel. So, looks like that is certainly a Kubota. Sure hope the cooling system was drained as per the warning decal. And, it sure looks like a project. Paul And if you haven't found the engine serial number, this URL will show where it might be located: http://www.kubotaengine.com/products/snid_en.html Paul Paul... this is awesome.. thanks... The first order ofthe day is to find a proper engine oil filter. I bought one filter today at Autozone that I thought would fit, but it has a diff. thread pitch on the nipple. Someone at smokstak said that I can find a proper filter at Autozone. |
#7
Posted to rec.crafts.metalworking
|
|||
|
|||
More engine pictures
Yeah. I used to be able to pull the 283 out of my Comet (yep, chevy in a
Ford!) in less than an hour. Of course, I had a LOT of practice. sigh. When I was sixteen, I could have the heads off a 283 Chevy motor in about an hour. Now it takes me that long to change my oil. Steve |
#8
Posted to rec.crafts.metalworking
|
|||
|
|||
More engine pictures
On 2009-08-03, RoyJ wrote:
Yeah. I used to be able to pull the 283 out of my Comet (yep, chevy in a Ford!) in less than an hour. Of course, I had a LOT of practice. sigh. When I was sixteen, I could have the heads off a 283 Chevy motor in about an hour. Now it takes me that long to change my oil. Keep in mind that cars have become a lot more difficult to work on, since you were 18 or 16 etc. i |
#9
Posted to rec.crafts.metalworking
|
|||
|
|||
More engine pictures
On Mon, 03 Aug 2009 10:06:06 -0500, the infamous Ignoramus28480
scrawled the following: On 2009-08-03, RoyJ wrote: Yeah. I used to be able to pull the 283 out of my Comet (yep, chevy in a Ford!) in less than an hour. Of course, I had a LOT of practice. sigh. When I was sixteen, I could have the heads off a 283 Chevy motor in about an hour. Now it takes me that long to change my oil. Keep in mind that cars have become a lot more difficult to work on, since you were 18 or 16 etc. My first truck was a '61 Ford F-100 with the 312CID V-8 engine. I could climb over the fender and stand next to the engine during the tuneup, removing the plugs/points/condenser/cap/rotor from the ground on either side. My 2007 Toyota Tundra is a larger pickup but it doesn't have more than 4" of clear space on either side. Additionally, its 4.7L engine is physically smaller than the old 312. I much prefer the newer vehicles. Does anyone here miss working on those damned carburetors? EFI is sooooooo nice! -- A great preservative against angry and mutinous thoughts, and all impatience and quarreling, is to have some great business and interest in your mind, which, like a sponge shall suck up your attention and keep you from brooding over what displeases you. -- Joseph Rickaby |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Pictures (not mine of course) -- Tod Engine Assembly done | Metalworking | |||
Get the red hot pictures, images & Pictures of the BollywoodActresses | Electronics Repair | |||
Get the red hot pictures, images & Pictures of the BollywoodActresses | UK diy | |||
Pictures of Steve Russell's stone crusher onalt.binaries.pictures.woodworking | Woodturning |