 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Compressor motor replacement
Due to luck, I was able to acquire a 7.5 HP single phase motor for
free. My compressor was originally 7.5 HP, but I put a 10 HP motor on it because I bought it without a motor. So, my next project will be taking out that 10 HP motor and putting in the 7.5 HP motor. It should be completely straightforward, as both are 215T frame. i |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Converting Compressor motor from 220 v to 110 v | Home Repair | |||
| Compressor motor on ts | Woodworking | |||
| air compressor motor dies | Home Repair | |||
| DC Motor for Large Air Compressor? | Metalworking | |||
| Compressor Motor: HP v.s. Amps? | Metalworking | |||
Threaded Mode
