Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 438
Default Petter diesel generator

I ran across a Petter diesel genset at the Green Dragon flea / farmers
market in Ephrata, PA last Friday. It's at the tool stand run by
"Larry" in building 5. I didn't think to look for specific
information on makers plates, etc, but it was small enough that it was
probably a single cylinder engine. I recall from my reading in the
past that Petters have a following, so I thought I'd mention it here
in case anybody's interested. The sign said he was asking $600 (or
best offer - I think) The Green Dragon is only open Fridays. Larry
has a smaller tool stand at Roots on Tuesdays, but my guess is that
the genset is heavy enough that it will stay at the Green Dragon
rather than travelling.

RWL

  #2   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 30
Default Petter diesel generator

On Apr 7, 9:37*pm, GeoLane at PTD dot NET GeoLane at PTD dot NET
wrote:
As I recall from my days working in a boatyard (in the early 50's),
the Petter diesels wee used as an engine in sailboats large enough to
have space below decks for them. I think we had a dock launch with
one... Joel in Florida
=======
I ran across a Petter diesel genset at the Green Dragon flea / farmers
market in Ephrata, PA last Friday. *It's at the tool stand run by
"Larry" in building 5. *I didn't think to look for specific
information on makers plates, etc, but it was small enough that it was
probably a single cylinder engine. *I recall from my reading in the
past that Petters have a following, so I thought I'd mention it here
in case anybody's interested. *The sign said he was asking $600 (or
best offer - I think) *The Green Dragon is only open Fridays. *Larry
has a smaller tool stand at Roots on Tuesdays, but *my guess is that
the genset is heavy enough that it will stay at the Green Dragon
rather than travelling.

RWL


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Chinese Diesel Generator RoyJ Metalworking 14 August 13th 08 07:51 AM
lister/petter ph1 dumper diesel engine - oil capacity? jim UK diy 2 April 10th 08 01:39 PM
Petter/ Lister starter motor [email protected] UK diy 0 September 5th 06 12:53 PM
Using an APC UPS connected to a diesel generator, how 'clean' does the output need to be? Jason Arthurs UK diy 5 February 17th 06 11:05 PM
Gunner (was Diesel generator, 2 questions) Jeff Harper Home Repair 5 September 30th 04 07:30 AM


All times are GMT +1. The time now is 03:39 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"