 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Brass screen supplier? (small amount)
Looking on the next shows several suppliers that'll happily sell me brass
or bronze (I don't care which) screen in 10/12/14 mesh (anything around that size is ok) but in lots much bigger than I need. Which is about a square foot. Suggestions? |
|
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
|
Brass screen supplier? (small amount)
_ fired this volley in
: Looking on the next shows several suppliers that'll happily sell me brass or bronze (I don't care which) screen in 10/12/14 mesh (anything around that size is ok) but in lots much bigger than I need. Which is about a square foot. Suggestions? MSC or McMaster-Carr. LLoyd |
|
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
|
Brass screen supplier? (small amount)
Keywords:
In article , _ wrote: Looking on the next shows several suppliers that'll happily sell me brass or bronze (I don't care which) screen in 10/12/14 mesh (anything around that size is ok) but in lots much bigger than I need. Which is about a square foot. Some craft stores sell it in ~ 6" square pieces. It may be finer mesh than you need. Doug White |
|
#4
Posted to rec.crafts.metalworking
|
|||
|
|||
|
Brass screen supplier? (small amount)
"_" wrote in message ... Looking on the next shows several suppliers that'll happily sell me brass or bronze (I don't care which) screen in 10/12/14 mesh (anything around that size is ok) but in lots much bigger than I need. Which is about a square foot. Suggestions? Look at smallparts.com |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Small brass parts - Polishing questions | Metalworking | |||
| Brass rod supplier ? | UK diy | |||
| Shaving Door by small amount | Home Repair | |||
| looking to buy a piece of brass screen or substitute | Home Repair | |||
| interference fit on small brass parts | Metalworking | |||
![_[_2_] is offline](https://www.diybanter.com/images/SultanThemeVB3R/statusicon/user_offline.gif)
Linear Mode
