Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 1,224
Default How the hell

On Tue, 16 Dec 2008 17:59:16 -0600, "Pete C."
wrote:


RoyJ wrote:

Kids might be the **LIGHT** infantry of snow removal but you need heavy
weaponry to blast the frozen snowplow windrow at the end of the driveway.


Back in the days when I dealt with significant snow, I had a very good
technique for dealing with the driveway being plowed in. I'd always try
to get out with the snowblower before the plow came and I would clear my
driveway, as well as a hundred feet or so along the road on the inbound
side of the driveway. The plow would come along plowing in everyone's
driveway, but as it approached mine, since I had already cleared back,
by the time it got to my driveway it wasn't pushing much of anything.

SWMBO thinks I do this because I just like playing in the snow!

Of
course if the plow showed up while I was doing this I'd just play
chicken and make him go around me. Whenever it was a new driver they'd
be a bit annoyed, but after a time they'd figure it out.

On the metalworking and welding subject, one time I caught a rock in the
blower and it broke the 2nd stage impeller off the shaft, so I had to
bring it in the shop, clear out the snow and weld it back on.

Gerry :-)}
London, Canada
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How the hell Gerald Miller Metalworking 0 December 17th 08 05:45 AM
PTV 745 from hell [email protected] Electronics Repair 1 September 12th 07 04:51 PM
Ok why the hell did I buy this???? Waynemak Metalworking 18 June 5th 05 07:15 PM
What the Hell is it? JRJohnson Metalworking 20 May 3rd 05 07:30 PM
RCD Hell diynovice UK diy 3 February 1st 05 08:30 PM


All times are GMT +1. The time now is 03:26 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"