 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Shear Pin on a Central Machinery Mini-Mill
I recently found a set of metal gears that will fit my Mini-Mill. I
know the standard plastic gears will strip out if the Mill tooling is pushed too far ( which I did once). I would like to put a shear pin in the drive system and I wonder if any of you have done it? What kind of shear pressure would be best? TIA, DL |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Step up from mini-lathe/mini-mill | Metalworking | |||
| Central Machinery 12 x 33 3/8 | Woodturning | |||
| Which Mill...Taig or Mini-Mill | Metalworking | |||
| Central Machinery 17" bandsaw | Woodworking | |||
| Central Machinery table saw? | Woodworking | |||
Threaded Mode
