Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Oiler (?) wirth HF Micro die grinder
I recently bought a "Micro die grinder" from HF:
http://www.harborfreight.com/cpi/cta...emnumber=47869 For $9.99, what the hell! I just used it and it's really nice for delicate work, where its super light weight makes it very easy to handle. But, the purpose of this post is to ask about the oiler that came with it: http://home.comcast.net/~bobengelhardt/oiler.jpg At least, I assume that it's an oiler. I put oil in it and the oil went into the grinder. Boy, did it ever - into & out of and all over my hands! So what's the trick to using these things? Do they have to be oriented a certain way? The included instructions did not even mention the device. Thanks, Bob |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Run chain saw without oiler? | Home Repair | |||
Pressure oiler made from grease gun. | Metalworking | |||
Brass Oiler - Urn Type Glass | Metalworking | |||
snyonr want an air regulator and oiler | Metalworking | |||
Do I need an oiler/filter/regulator? | Metalworking |