Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Pressure oiler made from grease gun.
Will the smaller grease guns that take the small tubes work for one of
these? I assume they are almost the same internally with smaller parts. Thanks, Steve |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
Pressure oiler made from grease gun.
I have used chain saw bar grease guns with success.
I put oil in the chamber and inserted the cup back in the end. The cup seems to prevent any big leaks and nothing came out of my unit as long as I stored it vertical. It pumped the oil just fine. Randy wrote in message oups.com... Will the smaller grease guns that take the small tubes work for one of these? I assume they are almost the same internally with smaller parts. Thanks, Steve |
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
Pressure oiler made from grease gun.
|
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
gas heating pressure problem | UK diy | |||
Too Much Pressure | Home Repair | |||
What's wrong with my central heating system? | UK diy | |||
relief valve or back pressure regulator | Metalworking | |||
How safe is it to short out pressure switches in central A/C conpressor? | Home Repair |