Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
bearing help.
We have a bearing thats nearly roasted in the natural gas furnace. Its a
NMB 608Z, near as I can figure this is the same as a 8x22x7mm bearing. Its for the exhaust fan near a lot of heat. I found tons of inline skate bearings that are 8x22x7mm, now the big question is does anybody have links or info regarding whether I should go ceramic,stainless, or just the cheapest steel ones I can get. after application data ? so I can wrap my head around this stuff. Thanks. Mike |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Load Bearing? HELP | Home Repair | |||
Does this have a bearing on house value? | Home Ownership | |||
Bearing Buddies | Home Repair | |||
Bearing Oil | UK diy | |||
THIS is a linear bearing?? | Metalworking |