Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 1
Default info

i would like to know if there is anything new to improve a buisness
network security an connection wise with a protection for the data

  #2   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 382
Default info

On Fri, 05 Oct 2007 03:36:34 -0700, elie wrote:
i would like to know if there is anything new to improve a buisness
network security an connection wise with a protection for the data


Yes, hiring a consultant who knows the topic.
  #3   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 369
Default info


"Dave Hinz" wrote in message
...
On Fri, 05 Oct 2007 03:36:34 -0700, elie wrote:
i would like to know if there is anything new to improve a buisness
network security an connection wise with a protection for the data


Yes, hiring a consultant who knows the topic.


John Conner ?

Best Regards
Tom.



  #4   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 2,600
Default info

According to Dave Hinz :
On Fri, 05 Oct 2007 03:36:34 -0700, elie wrote:
i would like to know if there is anything new to improve a buisness
network security an connection wise with a protection for the data


Yes, hiring a consultant who knows the topic.


Or for a start, posting to a newsgroup specific to the topic,
such as comp.unix.security (assuming that the systems in question are
unix).

And if you are running Windows, the first suggestion is to
switch any system exposed to the outside net to some flavor of unix, and
put any Windows boxen behind a separate firewall (not a firewall program
installed on the Windows system itself, which is just too vulnerable.

Enjoy,
DoN.

--
Email: | Voice (all times): (703) 938-4564
(too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html
--- Black Holes are where God is dividing by zero ---
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Looking for info! Rono Electronics Repair 0 July 7th 05 11:48 PM
looking for info (again) barry martin Home Repair 0 November 2nd 04 11:27 PM
looking for info (again) rosie readandpost Home Repair 2 November 1st 04 08:17 PM
WTD Info on Tapmatic 700X and info on Tapmatics Marty Escarcega Metalworking 3 June 8th 04 04:00 AM
INFO louis alleva Metalworking 3 November 6th 03 10:41 AM


All times are GMT +1. The time now is 06:03 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"