Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Odd wear on tires
Thanks to all w/suggestions. Bearings not sloppy,
Frame/axle not bent. Tires were 8 years old, and loosing 4-5psi per week. Been sitting and pressure was 21-22. New tires, pressure @ 62 seems to have solved it. thanks One of the folding 4' x8' kit trailers. It had several trips from S. Calif to Salt Lake City loaded to the gills without this kind of wear. Recently, been towing a honda CBR1000, about 475lbs. 3-4 thousand miles. Major wear on tires. ONLY change was installation of oil filled hubs. |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
Odd wear on tires
|
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
Odd wear on tires
Nope, that's actually 60psi, as specified on the sidewalls Tyres(bg!) are pretty floppy until pressurized. gary Is that 62 Olde Englishe pounds per Olde Engishe inch, pressurewise? If so, seems about 30 PSIG on the high side. |
#4
Posted to rec.crafts.metalworking
|
|||
|
|||
Odd wear on tires
|
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
tires in storage | Home Repair | |||
Band Saw Tires | Woodworking | |||
Winter Tires? | Home Repair | |||
bandsaw tires | Woodworking | |||
Bandsaw tires | Woodworking |