 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Tig Cooler Pump Question
I'm working on building a cooler for my tig, and have a good idea of what I
need from reading the many posts on the newsgroups. I came across this pump from Northern and harbor freight http://www.northerntool.com/webapp/w...eg oryId=1546 and I was wondering if anyone has tried it or not. I have a WP20 torch with 25' cables. The pump says it can push 55PSI and it seems to have more than enough flow. I would be using it for hobby use, and not very frequent very long periods of time, so the quality should not be a huge problem for me. Any comments? Thanks. |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Pump question (not a shower pump!) | UK diy | |||
| Another heating problem question! | UK diy | |||
| shower pump in loft problem advice required | UK diy | |||
| Further to my last post entitled 'Flushing and treating central heating question' | UK diy | |||
Threaded Mode
