Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Lapping nylon
Folks,
I'm attempting to fit a 1.5 inch nylon cylinder into a 1 inch diameter metal sleeve. The nylon will act as a piston for my spring piston pellet gun. I've heard for years that auto engine pistons are lap fitted for each cylinder and would like to give it a try. Could someone give me the basic idea of how this might be done for nylon? Thanks Tut |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
softening nylon 6/6 | Metalworking | |||
Flat Lapping | Metalworking | |||
Nylon Carpets | UK diy | |||
Can I dye nylon? | UK diy | |||
simi off topic nylon gear with broken tooth in paper shredder | Metalworking |