Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Water heater dip tube replacement
i have a 50 gallon a0 smith tank that I think has a dip tube problem.
I have read somewhere about replacing the dip tube with 3/4 inch copper pipe. Is this hard to do and how does the pipe attach to the top of the tank? Any help is greatly appreciated! ( By the way I missed that lawsuit so I cant get any help from that.) I think my tank was manufactured in 96 or 97.) |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
combi vs conventional | UK diy | |||
Water mains leak? | UK diy | |||
Immersion heater problems - cost or replacement | UK diy | |||
electric water heater | UK diy |