Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
anyone know what a Jabsco 2590 pump was used for?
I've put a jabsco 2590 pump on ebay (link below) for a friend - it's
not a bronze bodied pump - I presume it was for coolant, but for what application - I figure I can get my frined more $ if I can say what application it was for - but the number is long obsolete and I can't find anything with dilligent searching of the web here's the link http://cgi.ebay.com/ebaymotors/ws/eB...tem=4627830769 TIA bill Bill www.wbnoble.com to contact me, do not reply to this message, instead correct this address and use it will iam_ b_ No ble at msn daught com *** Free account sponsored by SecureIX.com *** *** Encrypt your Internet usage with a free VPN account from http://www.SecureIX.com *** |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
anyone know what a Jabsco 2590 pump was used for?
On Sat, 01 Apr 2006 20:53:18 -0800, "William B Noble (don't reply to
this address)" wrote: I've put a jabsco 2590 pump on ebay (link below) for a friend - it's not a bronze bodied pump - I presume it was for coolant, but for what application - I figure I can get my frined more $ if I can say what application it was for - but the number is long obsolete and I can't find anything with dilligent searching of the web here's the link http://cgi.ebay.com/ebaymotors/ws/eB...tem=4627830769 For whatever you need... ;-P Seriously - anything compatible with the body, impeller and seal materials - on a boat, either cooling water through a small engine, or pumping the used motor oil out during servicing, or pumping fresh sea water from a seacock fitting up and through the bait live-well to keep the bait fishies happy. If it had a 12v electric motor mounted, it would make a good engine pre-oiler with a check valve on the output and a suction fitting on the oil pan of the engine. -- Bruce -- -- Bruce L. Bergman, Woodland Hills (Los Angeles) CA - Desktop Electrician for Westend Electric - CA726700 5737 Kanan Rd. #359, Agoura CA 91301 (818) 889-9545 Spamtrapped address: Remove the python and the invalid, and use a net. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
fa: anyone with an old Gray Marine engine might want this Jabsco coolant pump | Metalworking | |||
Central heating pump help please | UK diy | |||
Submersible Pump Overloading in Cold Weather | Electronics Repair | |||
Water Pump / Pressure Tank Problem !!!!!! | Home Repair | |||
Need advice with rural water well pump design | Home Repair |