 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
How to machine a small positive feature?
Hi,
I need to to get a positive feature which is 100um diameter and 500um long (a very small rod) with milling machine. I can use aluminum or steel. I wonder if it is possible? If so which material is better? I think aluminum is easy to cut but may be too flexible for a feature like this. Any suggestions on the cutting parameters are highly appreciated. Thanks a lot! Regards, Tao |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| LF small milling machine | Metalworking | |||
| Hardinge Automatic Screw Machine ?s | Metalworking | |||
| Washing Machine, small black rubbery bits in dispenser drawer | UK diy | |||
| Wanted - small machine shop | Metalworking | |||
| Zanussi washing machine - blown program selector | UK diy | |||
Threaded Mode
