Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking,alt.home.repair
|
|||
|
|||
FIXED -- THANKS -- Was: Drill leaks electricity to case
Did you redo the gearbox grease while you had it apart?
Ignoramus15109 wrote: Thakns to all. I fixed it. I took the cover off and blew out accumulated carbon crud. It made a little cloud, I tried not to breathe and walked out of the garage for a little while to let it settle. After that, the drill runs (as it did before), but it no longer trips the same GFCI breaker. I tried starting and stopping it many times, shook it while running etc, but the breaker would not break. I made some pictures, but I doubt anyone would be interested -- just brushes touching the rotor. I want to say big thanks to all people who gave me good suggestions! It was the easiest fix of my life. I also tested hot to ground with a multimeter, no obvious leaks (I did not use a megger, but I used the 1M setting of the multimeter). For the record, I used rubber boots and gloves while I was trying the drill. Indeed, there is a big threaded hole on top of the drill, for inserting a big handle. Maybe it is even meant to be held by 2 people with a big handle. i |
#2
Posted to rec.crafts.metalworking,alt.home.repair
|
|||
|
|||
FIXED -- THANKS -- Was: Drill leaks electricity to case
use the marine grease, it is stickier.
Ignoramus22178 wrote: On Thu, 23 Feb 2006 14:19:00 GMT, RoyJ wrote: Did you redo the gearbox grease while you had it apart? I did not open the gearbox. Maybe I should. What kind of grease should I use. I have two kinds at home, green marine grease for inboard/outboard motor shafts, and white lithium grease for trailer hubs. Would it work? thanks i Ignoramus15109 wrote: Thakns to all. I fixed it. I took the cover off and blew out accumulated carbon crud. It made a little cloud, I tried not to breathe and walked out of the garage for a little while to let it settle. After that, the drill runs (as it did before), but it no longer trips the same GFCI breaker. I tried starting and stopping it many times, shook it while running etc, but the breaker would not break. I made some pictures, but I doubt anyone would be interested -- just brushes touching the rotor. I want to say big thanks to all people who gave me good suggestions! It was the easiest fix of my life. I also tested hot to ground with a multimeter, no obvious leaks (I did not use a megger, but I used the 1M setting of the multimeter). For the record, I used rubber boots and gloves while I was trying the drill. Indeed, there is a big threaded hole on top of the drill, for inserting a big handle. Maybe it is even meant to be held by 2 people with a big handle. i |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
FIXED -- THANKS -- Was: Drill leaks electricity to case | Metalworking | |||
Drill leaks electricity to case | Metalworking | |||
Drill leaks electricity to case | Metalworking | |||
Is Drill Doctor worth the price???? | Metalworking | |||
Tool sharpening in general | Metalworking |