Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking,alt.home.repair
|
|||
|
|||
Drill leaks electricity to case
Remember - only 20 milliamp will stop a heart.
Likely it is a powder layer (carbon from the brushes) that sprayed from themselves to the case. Carbon resistor that gets lower and lower. Likely a simple cleanup (inside) will do the trick. Martin Martin Eastburn @ home at Lions' Lair with our computer lionslair at consolidated dot net NRA LOH & Endowment Member NRA Second Amendment Task Force Charter Founder Ignoramus3408 wrote: I have this Black and Decker 450 RPM drill: http://igor.chudov.com/tmp/450-rpm-drill.jpg When plugged into a GFCI outlet, it leaks electricity to ground and pops the GFCI breaker. The leak is substantial, I believe, however when plugged into a regular breaker (and handled with caution appropriate for leaks to case), it actually works and does not blow the breaker. So, I think, the leak is limited in extent. My question is, what is the most likely culprit and how to approach repair of it. My another question is, what would be a typical application of this drill. I am trying to decide if I need it for anything. i ----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==---- http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups ----= East and West-Coast Server Farms - Total Privacy via Encryption =---- |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Drill leaks electricity to case | Home Repair | |||
Drill leaks electricity to case | Home Repair | |||
Drill leaks electricity to case | Metalworking | |||
Drill leaks electricity to case | Home Repair | |||
Funny lathe machining problem.... | Metalworking |