Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Can anyone identify this tool
I would say it is a home made arbor to allow one to get the cutter in
close to a shoulder for an undercutting operation. There is a picture of a commercial one one this page https://www.travers.com/pdfshow.asp?p=587 Ignoramus2963 wrote: My guess is that it is for making keyways and such on a mill... Any idea? http://igor.chudov.com/tmp/tool.jpg thanks i |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Is a jointer knife really just a jointer knife? | Woodworking | |||
For peer review, new FAQ section: Power Tools. Draft 2 | UK diy | |||
For peer review, new FAQ section: Power Tools. | UK diy | |||
Inner threading turning tool out of HSS...Need for astronomy project | Metalworking | |||
Basics on Depth of Cuts | Metalworking |