Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
ff
 
Posts: n/a
Default Filling in old swimming pool--some metal content

A neighbor has an old pool which is really poor condition and would like
to just
fill it in and use the space for something else. Question is, what is
the cheapest
and easiest way to fill a big hole in the backyard as far as labor and
materials?
Preferably a do it yourself job, no backhoe available. Just a pickup and
some
wheel barrows. It's 8 feet at the deepest and about 12 x 20 ft.

I was considering sections of corrugated steel culvert pipe surrounded
by rock and gravel but I'm no civil engineer.

ff

  #2   Report Post  
Grant Erwin
 
Posts: n/a
Default Filling in old swimming pool--some metal content

If there is a clear path so a truck can back up to it from the street,
then you can contact tree pruning/removal outfits and ask them if they
would divert their wood chip truckloads to the pool for awhile. Those
guys have to pay to dump those wood chips, and they just love it when they
find places willing to take them for free. They will rot down to dirt in
a couple of years and will then be entirely suitable as a soil base. In
essence, you don't do anything and just let them fill it up. I bet it
would be full in a year.

Of course, you might live in Tucson .. oh, well.

Grant Erwin
Kirkland, Washington

ff wrote:

A neighbor has an old pool which is really poor condition and would like
to just
fill it in and use the space for something else. Question is, what is
the cheapest
and easiest way to fill a big hole in the backyard as far as labor and
materials?
Preferably a do it yourself job, no backhoe available. Just a pickup and
some
wheel barrows. It's 8 feet at the deepest and about 12 x 20 ft.

I was considering sections of corrugated steel culvert pipe surrounded
by rock and gravel but I'm no civil engineer.

ff


  #3   Report Post  
ATP
 
Posts: n/a
Default Filling in old swimming pool--some metal content

Grant Erwin wrote:
If there is a clear path so a truck can back up to it from the street,
then you can contact tree pruning/removal outfits and ask them if they
would divert their wood chip truckloads to the pool for awhile. Those
guys have to pay to dump those wood chips, and they just love it when
they find places willing to take them for free. They will rot down to
dirt in a couple of years and will then be entirely suitable as a
soil base. In essence, you don't do anything and just let them fill
it up. I bet it would be full in a year.

They will never rot to dirt, since dirt contains quartz sand particles. It
will never be a stable soil base.


  #4   Report Post  
larry g
 
Posts: n/a
Default Filling in old swimming pool--some metal content

We had the road crew dump some piles of wood chips in our pasture figuring
that we would spread them to keep the mud down. By the time I got around to
spreading I found that they had burned from the inside and that only a
hollow mound of chips were left. I was real puzzled when I dug into the
first one to only have it collapse on itself. In the few months that they
sat there I never observed any smoke but they were all ash inside.
lg
no neat sig line
"Grant Erwin" wrote in message
...
If there is a clear path so a truck can back up to it from the street,
then you can contact tree pruning/removal outfits and ask them if they
would divert their wood chip truckloads to the pool for awhile. Those
guys have to pay to dump those wood chips, and they just love it when they
find places willing to take them for free. They will rot down to dirt in
a couple of years and will then be entirely suitable as a soil base. In
essence, you don't do anything and just let them fill it up. I bet it
would be full in a year.






  #5   Report Post  
Alan Moore
 
Posts: n/a
Default Filling in old swimming pool--some metal content

On Thu, 11 Dec 2003 21:17:47 GMT, ff wrote:

A neighbor has an old pool which is really poor condition and would like
to just
fill it in and use the space for something else. Question is, what is
the cheapest
and easiest way to fill a big hole in the backyard as far as labor and
materials?
Preferably a do it yourself job, no backhoe available. Just a pickup and
some
wheel barrows. It's 8 feet at the deepest and about 12 x 20 ft.

I was considering sections of corrugated steel culvert pipe surrounded
by rock and gravel but I'm no civil engineer.

It depends on what you want to use it for. If it's to be a sand box,
fill it with sand and you're done, although that would be an awful lot
of sand...

If you want to plant a tree that will have a deep taproot, you're
going to have to break up some concrete. If you'd like a nice detached
basement, just put some beams across the top and roof it over -- after
providing for access, adn a level floor, of course...

Al Moore


  #6   Report Post  
Sunworshiper
 
Posts: n/a
Default Filling in old swimming pool--some metal content

On Thu, 11 Dec 2003 21:17:47 GMT, ff wrote:

A neighbor has an old pool which is really poor condition and would like
to just
fill it in and use the space for something else. Question is, what is
the cheapest
and easiest way to fill a big hole in the backyard as far as labor and
materials?
Preferably a do it yourself job, no backhoe available. Just a pickup and
some
wheel barrows. It's 8 feet at the deepest and about 12 x 20 ft.

I was considering sections of corrugated steel culvert pipe surrounded
by rock and gravel but I'm no civil engineer.

ff


The idea of jack hammering a hole in the bottom is intriguing , but I
don't think it will help much. I would re-do it and sell the house if
they're sick of it. If they really want it gone , I would just jack
hammer the deck up and toss it in , that will get you 4" down. Then
call a pool excavator and when they get a job close by they will just
dump loads in the street and mini Bob Cat it in. Better yet , get them
to do the whole job cause they will have a hammer for the Bob Cat and
it will be done in one day. In Vegas it could be done for maybe under
$800. Call them up and ask , sure beats 50,000 wheel barrow loads !

Buy a skate board ! Have the deck removed and raise fish ! They
could have fun catching them and make the $ for the excavator.

Where are you ? They got a vertical mill to trade ? I get slow in
the winter time.
  #7   Report Post  
Joel Corwith
 
Posts: n/a
Default Filling in old swimming pool--some metal content


"Sunworshiper" wrote in message
...
On Thu, 11 Dec 2003 21:17:47 GMT, ff wrote:

A neighbor has an old pool which is really poor condition and would like
to just
fill it in and use the space for something else. Question is, what is
the cheapest
and easiest way to fill a big hole in the backyard as far as labor and
materials?
Preferably a do it yourself job, no backhoe available. Just a pickup and
some
wheel barrows. It's 8 feet at the deepest and about 12 x 20 ft.

I was considering sections of corrugated steel culvert pipe surrounded
by rock and gravel but I'm no civil engineer.

ff


The idea of jack hammering a hole in the bottom is intriguing , but I
don't think it will help much. I would re-do it and sell the house if


So now he has a swimming pool full of mud and water. Sounds like a
quicksand trap to me.

Joel. phx

they're sick of it. If they really want it gone , I would just jack
hammer the deck up and toss it in , that will get you 4" down. Then
call a pool excavator and when they get a job close by they will just
dump loads in the street and mini Bob Cat it in. Better yet , get them
to do the whole job cause they will have a hammer for the Bob Cat and
it will be done in one day. In Vegas it could be done for maybe under
$800. Call them up and ask , sure beats 50,000 wheel barrow loads !

Buy a skate board ! Have the deck removed and raise fish ! They
could have fun catching them and make the $ for the excavator.

Where are you ? They got a vertical mill to trade ? I get slow in
the winter time.



  #8   Report Post  
ff
 
Posts: n/a
Default Filling in old swimming pool--some metal content

Sunworshiper wrote:

On Thu, 11 Dec 2003 21:17:47 GMT, ff wrote:



A neighbor has an old pool which is really poor condition and would like
to just
fill it in and use the space for something else. Question is, what is
the cheapest
and easiest way to fill a big hole in the backyard as far as labor and
materials?
Preferably a do it yourself job, no backhoe available. Just a pickup and
some
wheel barrows. It's 8 feet at the deepest and about 12 x 20 ft.

I was considering sections of corrugated steel culvert pipe surrounded
by rock and gravel but I'm no civil engineer.

ff



The idea of jack hammering a hole in the bottom is intriguing , but I
don't think it will help much. I would re-do it and sell the house if
they're sick of it. If they really want it gone , I would just jack
hammer the deck up and toss it in , that will get you 4" down. Then
call a pool excavator and when they get a job close by they will just
dump loads in the street and mini Bob Cat it in. Better yet , get them
to do the whole job cause they will have a hammer for the Bob Cat and
it will be done in one day. In Vegas it could be done for maybe under
$800. Call them up and ask , sure beats 50,000 wheel barrow loads !

Buy a skate board ! Have the deck removed and raise fish ! They
could have fun catching them and make the $ for the excavator.

Where are you ? They got a vertical mill to trade ? I get slow in
the winter time.



I'm in the SF Bay Area. How about a pool table in trade?

ff

  #9   Report Post  
Sunworshiper
 
Posts: n/a
Default Filling in old swimming pool--some metal content

On Sun, 14 Dec 2003 00:51:28 GMT, ff wrote:

Sunworshiper wrote:

On Thu, 11 Dec 2003 21:17:47 GMT, ff wrote:



A neighbor has an old pool which is really poor condition and would like
to just
fill it in and use the space for something else. Question is, what is
the cheapest
and easiest way to fill a big hole in the backyard as far as labor and
materials?
Preferably a do it yourself job, no backhoe available. Just a pickup and
some
wheel barrows. It's 8 feet at the deepest and about 12 x 20 ft.

I was considering sections of corrugated steel culvert pipe surrounded
by rock and gravel but I'm no civil engineer.

ff



The idea of jack hammering a hole in the bottom is intriguing , but I
don't think it will help much. I would re-do it and sell the house if
they're sick of it. If they really want it gone , I would just jack
hammer the deck up and toss it in , that will get you 4" down. Then
call a pool excavator and when they get a job close by they will just
dump loads in the street and mini Bob Cat it in. Better yet , get them
to do the whole job cause they will have a hammer for the Bob Cat and
it will be done in one day. In Vegas it could be done for maybe under
$800. Call them up and ask , sure beats 50,000 wheel barrow loads !

Buy a skate board ! Have the deck removed and raise fish ! They
could have fun catching them and make the $ for the excavator.

Where are you ? They got a vertical mill to trade ? I get slow in
the winter time.



I'm in the SF Bay Area. How about a pool table in trade?

ff


Just a little too far. The only place I could put one is in my shop
and my machines would put up a fight. Or the living room , and then
the wife would leave and I could have friends over to play... nah

If you could put up good photos on a site I could give your friend
some advice. Can't see email pictures.
  #10   Report Post  
John D. Farr]
 
Posts: n/a
Default Filling in old swimming pool--some metal content

Fill it with water and raise catfish. John

"ff" wrote in message
...
A neighbor has an old pool which is really poor condition and would like
to just
fill it in and use the space for something else. Question is, what is
the cheapest
and easiest way to fill a big hole in the backyard as far as labor and
materials?
Preferably a do it yourself job, no backhoe available. Just a pickup and
some
wheel barrows. It's 8 feet at the deepest and about 12 x 20 ft.

I was considering sections of corrugated steel culvert pipe surrounded
by rock and gravel but I'm no civil engineer.

ff





  #11   Report Post  
Joel Corwith
 
Posts: n/a
Default Filling in old swimming pool--some metal content


"John D. Farr]" wrote in message
...
Fill it with water and raise catfish. John


Been done.

Joel. phx


"ff" wrote in message
...
A neighbor has an old pool which is really poor condition and would like
to just
fill it in and use the space for something else. Question is, what is
the cheapest
and easiest way to fill a big hole in the backyard as far as labor and
materials?
Preferably a do it yourself job, no backhoe available. Just a pickup and
some
wheel barrows. It's 8 feet at the deepest and about 12 x 20 ft.

I was considering sections of corrugated steel culvert pipe surrounded
by rock and gravel but I'm no civil engineer.

ff





  #12   Report Post  
Joel Corwith
 
Posts: n/a
Default Filling in old swimming pool--some metal content


"ff" wrote in message
...
A neighbor has an old pool which is really poor condition and would like
to just
fill it in and use the space for something else. Question is, what is
the cheapest
and easiest way to fill a big hole in the backyard as far as labor and
materials?
Preferably a do it yourself job, no backhoe available. Just a pickup and
some
wheel barrows. It's 8 feet at the deepest and about 12 x 20 ft.


If the area is not going to be used for a few years, find some pools going
in and offer to let them dump. If there's no holes in the bottom, a couple
of good rains will make a nice bog. Round here you can find dollar labor by
the bus stops. I get waved at quite a bit in my pickup and it ain't the
looks. The best way is the holes, then ABC as they call it down here.
Basically a mixture of dirt, sand, rocks, crushed stuff. Used under
roadbeds cause it packs well so no settling. Going the cheap route I'd hit
job sites where the concrete is getting busted up. Of course you'd have to
deal with settling and that will depend on what he wants to use it for.
Vegetable garden probably doesn't matter. Jacuzzi on a poured slab does.

Joel. phx


I was considering sections of corrugated steel culvert pipe surrounded
by rock and gravel but I'm no civil engineer.

ff



  #13   Report Post  
ATP
 
Posts: n/a
Default Filling in old swimming pool--some metal content

ff wrote:
A neighbor has an old pool which is really poor condition and would
like to just
fill it in and use the space for something else. Question is, what is
the cheapest
and easiest way to fill a big hole in the backyard as far as labor and
materials?
Preferably a do it yourself job, no backhoe available. Just a pickup
and some
wheel barrows. It's 8 feet at the deepest and about 12 x 20 ft.

I was considering sections of corrugated steel culvert pipe surrounded
by rock and gravel but I'm no civil engineer.

ff


It would take less than 70 yards of clean fill to completely fill the pool.
I would break the pool up with a bobcat, once you undermine it it may peel
right up, and get rid of it. The whole pool will probably fit in one or two
30 yard dumpsters, they don't usually make them that well. Fill it with
clean fill and top off with 6 to 8" topsoil. Not the cheapest way in the
short term but it may save headaches and money in the long run.


  #16   Report Post  
dogpoint
 
Posts: n/a
Default Filling in old swimming pool--some metal content


Check out this site:

http://pws.prserv.net/NormsPond/default.htm

They turned their pool into a fish pond.

Rich


  #17   Report Post  
Leo Lichtman
 
Posts: n/a
Default Filling in old swimming pool--some metal content

This was mentioned briefly as part of an earlier post, but it seems to have
gone unnoticed: Roof it over and convert it into an underground shop or
storage space. The roof could be put several inches below grade, so it can
be planted over, if they so desire.

Another idea: trade houses with the neighbor, and you'll have a swimming
pool. G


  #18   Report Post  
ff
 
Posts: n/a
Default Filling in old swimming pool--some metal content

Leo Lichtman wrote:

This was mentioned briefly as part of an earlier post, but it seems to have
gone unnoticed: Roof it over and convert it into an underground shop or
storage space. The roof could be put several inches below grade, so it can
be planted over, if they so desire.

Another idea: trade houses with the neighbor, and you'll have a swimming
pool. G




As a pool, it's too far gone. The sides are cracked all over. I like
that pond idea someone
had. Saw another pool/pond conversion on the net too. But I imagine that
is almost as much
maintenance as a pool to keep it looking good and clean. The amount of
leaves falling
around here is phenomenal.

ff

  #19   Report Post  
jim rozen
 
Posts: n/a
Default Filling in old swimming pool--some metal content

In article , ff says...

Saw another pool/pond conversion on the net too. But I imagine that
is almost as much
maintenance as a pool to keep it looking good and clean. The amount of
leaves falling
around here is phenomenal.


Ah but the natural life cycle of ponds is to fill in, and
convert to meadows, then forests. Just leave the thing
alone and in 100 years it will be tough to see for the
trees!



Jim

==================================================
please reply to:
JRR(zero) at yktvmv (dot) vnet (dot) ibm (dot) com
==================================================

  #20   Report Post  
ff
 
Posts: n/a
Default Filling in old swimming pool--some metal content

jim rozen wrote:

In article , ff says...



Saw another pool/pond conversion on the net too. But I imagine that
is almost as much
maintenance as a pool to keep it looking good and clean. The amount of
leaves falling
around here is phenomenal.



Ah but the natural life cycle of ponds is to fill in, and
convert to meadows, then forests. Just leave the thing
alone and in 100 years it will be tough to see for the
trees!



Jim

================================================= =
please reply to:
JRR(zero) at yktvmv (dot) vnet (dot) ibm (dot) com
================================================= =



So, just plant trees around the pool and wait for nature to take it's
course?

I suppose we could advertise it as a skateboard park and charge admission
to skate in the empty pool. ;-)

ff



  #21   Report Post  
jim
 
Posts: n/a
Default Filling in old swimming pool--some metal content

ff wrote:

A neighbor has an old pool which is really poor condition and would like
to just
fill it in and use the space for something else. Question is, what is
the cheapest
and easiest way to fill a big hole in the backyard as far as labor and
materials?
Preferably a do it yourself job, no backhoe available. Just a pickup and
some
wheel barrows. It's 8 feet at the deepest and about 12 x 20 ft.

I was considering sections of corrugated steel culvert pipe surrounded
by rock and gravel but I'm no civil engineer.

ff

how about a truck service where you call them out to dump some mud/sand
and let them just dump to the old pool......
probably need about 8-15 loads of mud....
  #22   Report Post  
Roy J
 
Posts: n/a
Default Filling in old swimming pool--some metal content

The older I get the better I like to do it right the FIRST time.
The right way on this is obvious and not terribly expensive if
you shop around a bit. A tractor mounted backhoe would make short
work of the walls, deck, and floor. Something like two truck
loads of concrete. Around here, there are several places that
accept this stuff, it is ground into road fill. Refill the hole
with clean fill, usually available for free, check with the city
building department to see who is building nearby. If your
dimensions are right, figure 3 truckloads of clean fill.

Depending on where you are, the city usually likes to see a
demolition permit. They like to see it done right too.

I haven't done anything like this lately but I'd guess $1000 to
$1500 would cover removal of ALL concrete, fill with clean dirt,
ready for lawn, garden, or new building. Note: if you want to
build on it, you need to tell the contractor so they can pack it.

PS: I've done this on a DIY basis, not happy with the results.


ff wrote:

A neighbor has an old pool which is really poor condition and would like
to just
fill it in and use the space for something else. Question is, what is
the cheapest
and easiest way to fill a big hole in the backyard as far as labor and
materials?
Preferably a do it yourself job, no backhoe available. Just a pickup and
some
wheel barrows. It's 8 feet at the deepest and about 12 x 20 ft.

I was considering sections of corrugated steel culvert pipe surrounded
by rock and gravel but I'm no civil engineer.

ff


  #23   Report Post  
bob m ologna
 
Posts: n/a
Default Filling in old swimming pool--some metal content

I turned my unwanted pool into a fish pond. I bought 75 catfish fingerlings
and a few tillapia. The tillapia eat the algae, the cats eat the tillapia,
and I ate the cats.

"ff" wrote in message
...
A neighbor has an old pool which is really poor condition and would like
to just
fill it in and use the space for something else. Question is, what is
the cheapest
and easiest way to fill a big hole in the backyard as far as labor and
materials?
Preferably a do it yourself job, no backhoe available. Just a pickup and
some
wheel barrows. It's 8 feet at the deepest and about 12 x 20 ft.

I was considering sections of corrugated steel culvert pipe surrounded
by rock and gravel but I'm no civil engineer.

ff



  #24   Report Post  
GMasterman
 
Posts: n/a
Default Filling in old swimming pool--some metal content

I filled a 20X40 gunite pool last year. Pool was built in 1959. I thought it
would be an easy job to just bust the apron and the top 24 inched of the walls
and push them in the hole and cover with dirt. No way. The cornors were 12
inches thich with lot's of rebar in them. A backhoe buchet would not break it
without lot's of effort. The sides were thinner and broke up easier, but still
not as easy as I expected. I had dirt hauled in byt the 25 yd dumptruck. The
whole job cost me $4000
  #25   Report Post  
 
Posts: n/a
Default

I have posted several pages of pictures and information on the
demolition/removal of our 50 x 20 concrete pool which you may find
interesting.
http://home.comcast.net/%7Ephil.detw...emolition.html



  #26   Report Post  
Sunworshipper
 
Posts: n/a
Default

On 12 Jan 2005 18:16:40 -0800, wrote:

I have posted several pages of pictures and information on the
demolition/removal of our 50 x 20 concrete pool which you may find
interesting.
http://home.comcast.net/%7Ephil.detw...emolition.html

Made my day. What was wrong with the pool in the first place? I've
fixed pools after the first couple of pictures. Hey, some people just
get sick of them, like me.

That was a good one though. Diving , skate board Haven, and I just
hate doing shallow 3.5' pools.
  #27   Report Post  
 
Posts: n/a
Default

Long story.....it was old (1967) and needed a bunch of repairs and we
didn't really want it in the back yard anymore anyway so....see ya!

  #28   Report Post  
 
Posts: n/a
Default

On 12 Jan 2005 18:16:40 -0800, wrote:

I have posted several pages of pictures and information on the
demolition/removal of our 50 x 20 concrete pool which you may find
interesting.
http://home.comcast.net/%7Ephil.detw...emolition.html

Not only interesting, but useful.
I've been thinking about getting rid of the 'azure albatross' for
years, but I also was quoted a cost of $10 K or so.

Thanks

--RC
"Sometimes history doesn't repeat itself. It just yells
'can't you remember anything I've told you?' and lets
fly with a club.
-- John W. Cambell Jr.
  #29   Report Post  
Terry Collins
 
Posts: n/a
Default


Not only interesting, but useful.
I've been thinking about getting rid of the 'azure albatross' for
years, but I also was quoted a cost of $10 K or so.


If you don't want it for a swimming pool, how about raising fish (for
viewing, relaxation or eating?
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Swimming pool plumbing ? JK UK diy 14 June 2nd 04 09:32 AM
Earth Bondng Adrian Simpson UK diy 8 March 21st 04 11:58 PM
using a shower unit to heat a swimming pool Smithwood456789 UK diy 11 July 25th 03 10:22 AM
Swimming Pool with Insulation. Hal UK diy 8 July 19th 03 10:14 PM


All times are GMT +1. The time now is 12:34 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"