Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
G-code converter software...
Hi all.
the place I work for is looking to get some software to convert from a CAD file (likely an AutoCad DXF or something or an Autodesk Inventor file of some sort) to G code, so that it can be directly loaded into the mill control. We are using a Willis CNC mill with an Anilam control. It is a basic 3 axis setup, and we are doing what I think is fairly garden variety work on it, ie. no jet turbine wheels, etc. Cash is REALLY tight, so the cheaper the better, but I am well aware that you usually get what you pay for. Any suggestions for software that we should consider? I would much appreciate some ideas as to where I should start looking. Thanks for any help!! -AL |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Bathroom Design Software | UK diy | |||
Motor Phases | Metalworking | |||
OT - PLC Programming Software | Metalworking | |||
Voltage on Phase Converter | Metalworking | |||
recmd to mark steel part with changing lot code? | Metalworking |