G-code converter software...
 

Hi all.
the place I work for is looking to get some software to convert from a CAD
file (likely an AutoCad DXF or something or an Autodesk Inventor file of
some sort) to G code, so that it can be directly loaded into the mill
control.

We are using a Willis CNC mill with an Anilam control. It is a basic 3 axis
setup, and we are doing what I think is fairly garden variety work on it,
ie. no jet turbine wheels, etc.

Cash is REALLY tight, so the cheaper the better, but I am well aware that
you usually get what you pay for. Any suggestions for software that we
should consider?

I would much appreciate some ideas as to where I should start looking.

Thanks for any help!!
-AL

G-code converter software...
 

On Mon, 24 Nov 2003 23:59:22 GMT, "AL A." wrote:

Hi all.
the place I work for is looking to get some software to convert from a CAD
file (likely an AutoCad DXF or something or an Autodesk Inventor file of
some sort) to G code, so that it can be directly loaded into the mill
control.

We are using a Willis CNC mill with an Anilam control. It is a basic 3 axis
setup, and we are doing what I think is fairly garden variety work on it,
ie. no jet turbine wheels, etc.

Cash is REALLY tight, so the cheaper the better, but I am well aware that
you usually get what you pay for. Any suggestions for software that we
should consider?

I would much appreciate some ideas as to where I should start looking.

http://www.imsrv.com

Best Regards,

Fred Smith - IMservice


NG and hobby discounts are at

http://www.imsrv.com/hobby

G-code converter software...
 

http://www.yeagerautomation.com
look for ACE converter. It's free, and source code is GPL'd.
/mark


"AL A." wrote:

Hi all.
the place I work for is looking to get some software to convert from a CAD
file (likely an AutoCad DXF or something or an Autodesk Inventor file of
some sort) to G code, so that it can be directly loaded into the mill
control.

We are using a Willis CNC mill with an Anilam control. It is a basic 3 axis
setup, and we are doing what I think is fairly garden variety work on it,
ie. no jet turbine wheels, etc.

Cash is REALLY tight, so the cheaper the better, but I am well aware that
you usually get what you pay for. Any suggestions for software that we
should consider?

I would much appreciate some ideas as to where I should start looking.

Thanks for any help!!
-AL