Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Missing parts for a DV 59 compound slide?s
My employer bought on ebay a compound slide which is missing whatever
it is that clamps it to the bed of the machine. We have the Operators"s manual but what is shows is different from the machine we have. It shows a lever which would be across the bed from the operator and a "latch" that is raided to remove or move the unit. the lever loosens the compound to move it forward or back. Ours has tee slots on either side of the part that would be clamped to the lathe bed. I can see how something could be fabricated but it would be really great if someone could post a picture or sketch. Thanks in advance Ken |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Parts with ball missing in it | Metalworking | |||
Price of Plumbing Parts | Home Repair | |||
Any Source to Buy Conductive Anti-Seize Compound? | Home Repair | |||
Seeking shop that can make some small brass parts. (USA) | Metalworking | |||
cleaning parts after tumbling | Metalworking |