Could it be both male male had the male pinout not the female pinout - mirror image ?

Martin
Martin Eastburn
@ home at Lions' Lair with our computer lionslair at consolidated dot net
NRA LOH, NRA Life
NRA Second Amendment Task Force Charter Founder


Ignoramus4939 wrote:
I have this Hobart CyberTig:

http://igor.chudov.com/projects/Weld...berTig-Welder/

It has two Amphenol connectors, the big fat one for pendant and a 10
pin one for foot pedal.

I bought a 10 pin foot pedal off ebay. Unfortunately, both the foot
pedal as well as my connector on the welder, were male. I bought a 10
pin Amphenol socket, wrote down the current pinout, and unsoldered old
plug and re-soldered the wires to the new socket. I wrote down the
exact pinout, etc etc. I double checked things numerous times.

The trouble is that the pedal seems to have no effect whatsoever. The
valves do not "click", etc.

Before I go on an all out troubleshooting effort, perhaps someone
could point out something obvious that I am missing. I can supply
pictures of the pedal or the welder etc.

i


----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----