 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Metal Chair repair
OK ... this should be simple enough.... thats what I thought...
My Husband has one of those metal reclining chairs with the ottoman in the living room... One of the bolts broke off that holds the back to the arm... We got a bolt extractor which has now broken off... I though maybe if I cut that off and drilled the hole back out I could thread a jewlers saw blade through and cut the bolt in quarters and then pry them out.... but I'm not sure I could drill through that extractor. Any Ideas folks?? thanks in advance...... KJ |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Re-upholster an office chair? | Home Repair | |||
| Tingle from metal lamp = dangerous? | UK diy | |||
| Tingle from metal lamp = dangerous? | Home Repair | |||
| Tingle from metal lamp = dangerous? | Home Repair | |||
| Plans for the Hemingway chair? | Woodworking | |||
Threaded Mode
