 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
spray paint can question
Is there any safe way to open a still-pressurized can of spray paint with a
completely plugged nozzle, to get the paint out so I can brush it on? How about if I made a tool e.g. drilled a small hole in a Popsicle stick or tongue depressor, turned the can upside down, removed the nozzle, and depressed the valve stem with the hole aligned? Maybe the air would all come out and leave the paint inside, then I could cut it open any way I wanted reasonably safely. Ideas? Experience? GWE |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| New Krylon Spray Paint - Don't Bake It?? | Metalworking | |||
| Paint & primer question... | Metalworking | |||
| best spray paint (and primer) for exterior steel ? | Metalworking | |||
| Krylon Fusion Spray Paint | Home Ownership | |||
Threaded Mode
