Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
alignment pin source?
Hello,
I am making some glass presses for my sister out of brass. There are quite a few to be made and she wants alignment pins on them. If anyone knows of a cheap source for these I would be very gratefull. I;m looking for a pin diameter of 1/4", overall length of 2.5" with a taper length of about 1/2". None of these dimensions are terribly critical. If it matters I'm located in Edmonton, ALberta, Canada. I know I can make these but if they are available for a reasonable price I'd rather buy them and spend the time on the press. Thanks for the help, Al |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Survey: A Little Feedback For Cliff | Metalworking | |||
Try this Gunner | Metalworking | |||
View Source virus.... | Electronics Repair | |||
OT - Delay, Delay | Metalworking | |||
How to Adjust the Tape Path Alignment on Newer VCRs | Electronics Repair |