Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Two-Part Epoxy?
Anyone have any experience using two-part epoxy on painted metal? I need to
"pull" some painted metal similar to automotive sheet metal into position and hot glue simply doesn't stick well enough. Ultimately, I'd like to save the paint under and around the epoxy, but if I have to, I'll touch it up later. It's not critical but desirable... Suggestions also welcome! I need at least 10-15 PSI pulling power without the "stuff" letting go from the surface. In other words, plenty of stick... I'm crossposting (eegads!) to the woodworking group since you folks also use glues often and work with moth wood and metal lots... Regards, Joe Agro, Jr. (800) 871-5022 (908) 542-0244 http://www.AutoDrill.com http://www.Multi-Drill.com V8013-R |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Help finding old router part | Woodworking | |||
Friday Challenge - part two | Metalworking | |||
OT Guns more Guns | Metalworking | |||
Part P - new cable colours | UK diy | |||
rec.woodworking ANTI-FAQ Part 1 of 10 - General | Woodworking |