 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#2
|
|||
|
|||
wrote:
I need for approximately a 20 feet by 20 feet square. That's about 6,1m x 6,1m. Assuming you make it 0,15m high, you get about 5,6 cubic meters. BTW: Don't believe the other posters that do their math in feet and yard, these are _illegal_ units! :-P Nick -- Motormodelle / Engine Models: http://www.motor-manufaktur.de Ellwe 2FB * VTM 87 * DLM-S3a * cubic more to come ... |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Gravel drive for car access | UK diy | |||
| Pitch and gravel roof? | Home Repair | |||
| Pitch and gravel roof? | UK diy | |||
| Pitch and gravel roof? | Home Repair | |||
| how do I attach gravel board to metpost? | UK diy | |||
Threaded Mode
