Hi

I want to fit a gravel board between posts. One end is fine, because
the wooden fence post goes right down to the ground level. So I will
just screw some brackets into the post, then attach gravel board to
bracket.
The other end is the tricky part. I had to use a metpost which is
bolted into the ground, so I have no wood to attach the gravel board
to. So my problem is how to attach the gravel board to a metal
metpost. Metpost sell clips to attach to wood, but not to metal.
Can anyone make any suggestions on how to bodge this?!

thanks
R.

[] []
[] []
[] [] == fence post
[] []
[] []
[] []
[] []
[]-------------------##
[] gravel board ## == MetPost
[]-------------------##

R wrote:

Hi

I want to fit a gravel board between posts. One end is fine, because
the wooden fence post goes right down to the ground level. So I will
just screw some brackets into the post, then attach gravel board to
bracket.
The other end is the tricky part. I had to use a metpost which is
bolted into the ground, so I have no wood to attach the gravel board
to. So my problem is how to attach the gravel board to a metal
metpost. Metpost sell clips to attach to wood, but not to metal.
Can anyone make any suggestions on how to bodge this?!

I'd probably just drill the Metpost and use self tappers.
Or am I missing something?

Lee
--
To reply use lee.blaver and ntlworld.com

In message , R
writes
Hi

I want to fit a gravel board between posts. One end is fine, because
the wooden fence post goes right down to the ground level. So I will
just screw some brackets into the post, then attach gravel board to
bracket.
The other end is the tricky part. I had to use a metpost which is
bolted into the ground, so I have no wood to attach the gravel board
to. So my problem is how to attach the gravel board to a metal
metpost. Metpost sell clips to attach to wood, but not to metal.
Can anyone make any suggestions on how to bodge this?!

Attach the clips using self tappers into holes drilled in the Metpost?

Or drill out and put wood screws through into the post?
--
Chris French, Leeds