Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
What machines would this chuck fit?
I recently picked up an Atlas 12x36 lathe, and with it was a 9"
diameter 3 jaw Cushman chuck with a 2 1/4"-8 threaded backplate. Obviously to big for the Atlas, but what machines could take this chuck? Thanks, -Bruno |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Damn Chuck | Metalworking | |||
Teknatool Titan Chuck draft review | Woodturning | |||
Need help identifying old Delta Drill Press & need chuck key | Metalworking | |||
Runout on 3 Jaw Chuck | Metalworking | |||
Cuemaking-Metal Lathe Chuck Question? | Metalworking |