Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Advice requested - make or buy? Or?
"ldg" wrote in message ... I've been lurking this group for a few weeks in hope of answering my own questions from your experience, but I'm a little to dense to solve this apparently. I need patio brackets. I hired a guy to make plans for several additions to the house, one being a tile covered patio. This patio looks simple enough on paper. it has 6 posts, with 4 being at 45 degree angles. The framing is 6x6 lumber, and there are 2 large trusses made with these large beams that span the 20 foot width. The problem is no one seems to make 45 degree brackets to hold the wood up. My carpenter found a local blacksmith who can make the brackets, but his schedule is such that I'm probably not going to get the thing done this year. My wife is upset and that, believe me, is not a good thing. Anyone have any suggestions? I did some welding about 30 years ago. I suppose I could buy an arc welder and plasma cutter, then just do the job myself. (To tell the truth this is appealing.) The problem is I'm not in the least artistic. How can I make a simple, yet decorative set of brackets? I looks at though a fairly simple jig could be made of the decorative cuts in some sort of (ceramic?) guide, then the shape could be cut out with a plasma cutter. This would leave straight welds, which I could probably handle. Am I way off base? Thanks for any help. It's ok to make fun. I deserve it by now. Anyone that would pour concrete in 45 degree corners and not research the entire patio parts list ahead of time should be made fun of. :-) From this group, I've sort of settled on the Miller 625 plasma cutter and the Miller 210 welder. The cost is still considerable less than having the brackets made. What do ya think? Regards. Larry Larry Here is another idea that you may not have thought of. That is to post your location and ask if there is anyone on this NG who would be interested in building them for you. I've also posted this on the rec.crafts.metalworking newsgroup which is another very helpful NG. Both of these NG's have some very capable people. Good luck. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
MAKE YOUR OWN MONEY | Home Ownership | |||
how to make big money fast | Home Ownership | |||
OT Guns more Guns | Metalworking | |||
make millions from home | Home Ownership |