Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Lathe Manuals Wanted Zyto 12" + Warwick 18"
Hi All.
Firstly I should admit I'm a newbi so please bear with me, it's been several decades since I last did any lathe work. I got a Zyto and a Warwick more or less as a job lot and I've asked www.lathes .co.uk about manuals but had no response. Fortunately I have been able to get a copy of the "Amateur Lathe" off ebay but I would still like to see the machines manuals especially as I need to set them up. If you have the manuals either to sell or copy please let me know. If it's a copy I'll happly pay postage or whatever costs are incured. Anything else I should be reading to get me started? In fact I don't need both I'll probably keep the Warwick as it seems in better condition. Finally is this the most appropriate newsgroup to as these questions? Many Thanks Ora |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
RAMCO Lathe parts/Manual - Wanted - HELP !!!! | Metalworking | |||
What is a second operation lathe? | Metalworking | |||
wanted: 8" 3 jaw chuck with/without 2 1/4 x 8 backplate, OR buy my lathe | Metalworking | |||
Logan Lathe Tool Gloat | Metalworking | |||
Lathe die head Wanted!! | Metalworking |