Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
OT Ford adhesive-removal of
Just discovered the rear quarter window on my '95 Ranger PU uses four
threaded studs to hold the window gasket to the body, sealed by putty and the glass is GLUED to the gasket. Broke the window and have not been able to disolve the glue to get all the little pieces of broken safety glass off the gasket. Tried Acetone, cleaning solvent, and carb cleaner. BTW, the local Ford dealer quoted me $734 for the window!!!!! Any help appreciated. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Removal of tile adhesive | UK diy | |||
Removing vinyl floor tile adhesive | UK diy | |||
Sticky situation - adhesive question .. oh ha ha (sorry) | UK diy | |||
Electrolytic Rust Removal & Power Supplies | Woodworking | |||
Remove Old Floor Adhesive? | Home Repair |