Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Zamac bar stock?
Does anyone sell Zamac bar stock? I'm doing some repairs on a little
sliding table saw and there's a little flange on the arbor that needs to be replaced. It's non-magnetic, appears to have been cast, and looks like the gears that were on my old Craftsman lathe. McMaster-Carr sells a zinc alloy ingot that might work. It's 95% Zn, 4% Al, and 0.1% Cu, which seems to be pretty similar to Zamac 3 or 7. Would that alloy be machinable in a non-critical application? Mike |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Does anybody sell pre-made dovetail stock? | Metalworking | |||
1" wide 1/4" thick Al flat stock rolling bender project? | Metalworking | |||
For Sale: Muzzle Loading Rifle barrel & stock (unfinished) | Metalworking | |||
Woodhaven's stock sizer | Woodworking | |||
Toronto area lumber? | Woodworking |