Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
PTO u joint update
Well, I got the u joint in but two apposing cups dont seem to be in the
bore far enough below the grove the spring holders go in. Although I am not sure. I will say when I twist it there is abolutely no give in the joint like would be evidenced with a bad u joint. One other thing I found is after about 3 full squirts of grease grease started coming out from under the little rubber seals at the end of some of the caps. is this normal? |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
broken corner joint in maple | Woodworking | |||
A tiny little leak in a soldered joint... | Home Repair | |||
Interesting Joint | Woodworking | |||
Bad odor coming from expansion joint around interior wall of home | Home Repair | |||
Scarf joint or butt joint your choice on crown molding? | Woodworking |