For the first time ever I have a house with no heat and cold weather coming
fast. I would love input from the group on the best type of temporary heat
for a remodel in progress. Because of the stage (drywall just going up) I
will be limited to kerosene or propane (20# tanks). I am interested in
safety, operating cost and equipment cost in that order. Would any of them
be acceptable (generally considered safe) to leave operating overnight with
no supervision?

TIA

Colbyt

"Colbyt" wrote in message
...
For the first time ever I have a house with no heat and cold weather
coming
fast. I would love input from the group on the best type of temporary
heat
for a remodel in progress. Because of the stage (drywall just going up) I
will be limited to kerosene or propane (20# tanks). I am interested in
safety, operating cost and equipment cost in that order. Would any of them
be acceptable (generally considered safe) to leave operating overnight
with
no supervision?

no, nor at any time, night or otherwise, and both put off toxic fumes
harmful to humans which can be deadly in confined areas like the ones you
mention (in a drywalled room)

also not safe unsupervised, overnight, or anytime, some rely on the newer
technology catalytic propane heaters which don't burn but rather "crack" the
propane, supposedly making it safe indoors with humans as to breathing,
noting a slight smell may be detected due to odors purposefully put in
propane so humans can smell it when it leaks, consult manufacturer of any
specific heater as to proper use

maybe local fire department can help finalize ideas



TIA

Colbyt

I Work for a HVAC shop and we often put in shop heaters for temporary heat.
The heaters I describe are the type like the Modine Hot Dawg or Reznor UDAP.
just remove a window, cover it with plywood and run a vent trough it. 20#
propane tanks will not get you far for that type of heat. You can only get a
few hours of heat with the load you require. A propane supplier may set a
tank near the house and run a rubber hose into run temp heat, ask them. A
local HVAC shop may have a heater or furnace they would install for temp
heat also.
Greg


"Colbyt" wrote in message
...
For the first time ever I have a house with no heat and cold weather
coming
fast. I would love input from the group on the best type of temporary
heat
for a remodel in progress. Because of the stage (drywall just going up) I
will be limited to kerosene or propane (20# tanks). I am interested in
safety, operating cost and equipment cost in that order. Would any of them
be acceptable (generally considered safe) to leave operating overnight
with
no supervision?

TIA

Colbyt

"Colbyt" wrote in message
...
For the first time ever I have a house with no heat and cold weather
coming
fast. I would love input from the group on the best type of temporary
heat
for a remodel in progress. Because of the stage (drywall just going up) I
will be limited to kerosene or propane (20# tanks). I am interested in
safety, operating cost and equipment cost in that order. Would any of them
be acceptable (generally considered safe) to leave operating overnight
with
no supervision?

TIA

Colbyt

Be careful with kerosene. It gasses and will put oily stuff on the walls and
ceiling.
The only kerosene heater that I am aware of that does not vents to the
outside. It looks a lot like a window air conditioner, made by Kerosun. Not
sure if they are even made any more.

A local HVAC shop may have a heater or furnace they would install for temp
heat also. Greg

Absolutely your best choice. The time you save working in a comfotable
environment will more than pay off the cost of the heat system. Then have them
install the temp outfit in your new agarage/workshop. HTH

Joe