Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
Re-cording bench grinder
I am replacing the switch to my 6 inch bench grinder.
The wires going to the motor housing are both white. Green ground wire goes from cord to ground screw on the grinder housing. I did not write down which wire went to ground and which goes to the hot wire. I believe the wheel should turn counter clockwise. I used a meter to check continuity and find out where the hot and neutral wires go. Could someone tell which goes where? https://imgur.com/rzKPqqw Andy |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Integra Curtain Track - Cording Pulley | UK diy | |||
Converting your angle grinder to a bench grinder | UK diy | |||
Harbort Freign Grinder/wet grinder | Woodturning | |||
Harbort Freign Grinder/wet grinder | Woodworking | |||
FA ending soon Dumore compound grinder or tool post grinder | Metalworking |